For your 2002 Acura MDX there are a few trailer hitch options. All of them are great and would essentially be just as good as the other. So because of that I would recommend the Curt part # 13328 if it were me as it is priced the best. I attached an install video for this for you to check out as well.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch... view full answer...
I do have an option for you but the rubber strips installed into the top crossbar channel on select roof racks are specific to the crossbar. Therefore, in order for us to help you get the correct replacements we'd need to know exactly which ones you have. If you have the Thule AeroBade Edge Crossbars for example then you'd need the Replacement Cover Strip with Pattern for Thule AeroBlade Edge Cross Bars part # TH69JH.
If you have another set of crossbars please just let me know what you... view full answer...
I spoke with my contact at Curt and found out that trailer hitch # C13146 will fit with the full sized spare on your 2015 Acura MDX as long as it's an 18 inch wheel and not 19-20 inch. I have included a link to a video showing an example installation of this trailer hitch for you. view full answer...
Yes, If you go to the Replacement Hardware Kit # RHK, you will simply put in the hitch item number and select the manufacturer from the drop down box.
For instance the Draw-Tite Max-Frame Trailer Hitch Receiver # 75614, you will put the 75614 in the item number and select Draw-Tite from the drop down menu.
If this is for a factory installed option you will have to source the hardware locally as Acura will only sell the entire assembly with hardware. Looking at their instructions you... view full answer...
I believe you are asking about the straps as well for your Yakima WindShield fairing, which go with the hardware and fits around aero crossbars; we do have that with the following:
- Replacement Attachment Straps for Yakima WindShield Roof Rack Fairing # Y83XR
- Replacement Hardware Bag for Yakima Fairing # Y8870044 view full answer...
We have exactly what you need! Replacement Hardware Kit for Trailer Hitches, # RHK, includes all of the mounting hardware needed. Just go to the # RHK product page, enter the hitch number (75614) and manufacturer (Draw-Tite) and you'll be set. view full answer...
I have a solution for you but the Replacement Hitch Adapter # Y8890174 will not work for your Yakima Holdup # Y02445.
We have the 2-inch replacement tongue you can install on your bike carrier. It is part # 8880580.
Or, if you prefer to replace the spine and tongue on the bike carrier we also have that available. That is part # 8890277. view full answer...
For the original T2 916 bike rack the correct replacement locking ratchet arm is actually # 753-3579 which is the same one for the Sidearm bike racks.
If you also need the hook for the arm it is # 753-3583. You may also need # 853-5960 which is the Replacement RQL Arm Bearing Half. view full answer...
If the Ventadome roof vent you have on your trailer has four mounting points then the replacement vent cover is part # BVE0108-03.
This dome is designed to fit # V3092-601-00, # V3092-603-00, # V3094-601-00, # V3094-601-00C, # V3094-603-00, and # V3094-603-00C vents. view full answer...