Although not listed as a fit for the Rebel model we had a customer come back and tell us they were able to install the Draw Tite hitch part # 65081 on their Rebel model with modifications. They had to cut a small square in the front bumper and remove the tow hooks. view full answer...
You are correct that if your 2018 Ram 2500 has the factory tow hooks, they will need to be removed to install the EcoHitch Front Mount Trailer Hitch Receiver # 306-X7900 but they will not be able to be reinstalled.
With that said the # 306-X7900 has built in tow hooks as shown in the included picture to replace the factory tow hooks, as the hitch takes up the space that the tow hooks were installed. view full answer...
I attached a picture of how the Draw Tite front hitch part # 65063 installs and it uses the tow hooks to bolt through the mounting plate of the hitch to the truck frame. Since you have the area available where the tow hooks install I'd recommend getting a set of them from a RAM dealer so that you can then install this hitch. view full answer...
As long as your 2010 Lexus RX 350 isn't an F Sport model the tow hooks of your Curt Hitch part # C13143 can be reinstalled afterwards.
I attached an install video for you to check out as well. view full answer...
The Curt tow hooks part # C22401 are a universal style tow hook that could possible fit your 2019 Nissan Frontier but you would have to compare the bolt hole dimensions of the hook to your vehicle frame. The bolt hole diameters of this are 1/2 inch and they are separated by 1-1/2 inch. view full answer...
Yes, if you acquired the tow hooks and mounting hardware for your 1995 Jeep Grand Cherokee the Aries Grille Guard part # AA1042 that you referenced will fit the vehicle and work well. view full answer...
The actual tow hooks on your 2016 GMC Canyon cannot be used for flat-towing as there would be no way to secure a tow bar to them. The same part of the frame that the tow hooks attach to will then be used for the base plates which attach to the tow bar but again there is not anything to directly attach a tow bar to the tow hooks.
If you are looking for a more cost effective setup I recommend the Roadmaster Crossbar-Style Base Plate Kit part # RM-523182-4 with the Roadmaster Falcon 2 Tow... view full answer...
The Demco Base Plate Kit part # DM9519308 requires the removal of the tow hooks on the front of your 2016 Jeep Cherokee Trailhawk. If you check out the attached picture you'll see that the base plate kits basically replaces the tow hooks. There are safety chain loops on the base plate kit that could be used in a similar way as the tow hooks. view full answer...
The tow hooks of your 2014 Ram 1500 4WD have to be removed to install the Curt trailer hitch part # 31374 as they interfere with where the hitch would need to install. The good news is that this hitch comes with two safety hook loops which can be used if you were to ever have a need for the tow hooks. view full answer...
You would need to use the factory tow hook bolts to install the Aries Grille Guard part # AA1044 but you would not need the actual tow hooks. Without those bolts the guard cannot install. view full answer...
If you open the install instructions link I attached to this page for the # 36587 and scroll down to the page that says sheet 6 of 21 you will see where the install instructions start for versions of the Jeep Renegades like yours that do have the tow hooks.
I also attached the page I took from the install instructions that cover this as well. view full answer...
If you wish to retain the front tow hooks on your 1998 Ford F-150 then you are going to want to use the Curt Front Mount Trailer Hitch Receiver part # 31049, not the Draw-Tite Front Mount Trailer Hitch Receiver part # 65025. The reason for this is that the Draw-Tite hitch installs between the two frame rails and a chance for interference with the tow hooks is possible whereas the Curt hitch installs underneath the frame rails and there is not a chance for interference. I have attached a... view full answer...
The Bulldog Winch Winch Mounting Plate Kit # BDW20009 that you referenced attaches to the top of the bumper on your 1986 Jeep CJ-7 so it would not interfere with the tow hooks you have at all. view full answer...
I checked the install instructions for the Draw Tite # 65074 which fits your 2018 Toyota 4Runner and there is no mention of having to remove the tow hooks to install it. Also, the safety chain loops on the hitch that are to either side of the hitch tube can be used as tow hooks as well. view full answer...
Yes the Westin Sportsman grille guard part # 40-3845 does fit your 2020 Chevy Colorado ZR2. You will be able to retain your tow hooks as well as the mounting brackets of this guard install behind the tow hook. view full answer...
You will be able to retain the factory tow hooks on your 2014 Ram 1500 4x4 using Draw-Tite front mount trailer hitch # 65062. The instructions, linked to the right, indicate that you can retain the stock tow hooks. view full answer...
The Curt 10K Bolt On Tow Hook # C22411 is a universal style tow hook that could work on your 2004 Chevy Silverado but it might require drilling to install. The mounting holes are 1/2 inch in diameter and are separated by 1-1/2 inches. view full answer...
Yes, you can use tow hooks with the Rampage Grille Guard # RA7659. I have spoken to my contact at Rampage about a similar question as this and he said that you may have to swap the hooks from one side to the other but they will fit. view full answer...
Yes, the Curt front hitch part # C87FR that you referenced is a confirmed fit for your 2021 Ram 1500 with factory tow hooks. The tow hooks of the truck do need to be removed to install this hitch though which is the case for all front hitches that fit your vehicle. view full answer...