Expert Answers about Mazda 2

• Trailer Hitch Recommendation to Carry Bikes on a 2012 Mazda2
• On both the discontinued Hidden Hitch trailer hitch, 60286, and Curt hitch # C11073, the hitch receiver will be located directly below the rear fascia on the vehicle. You can see pictures of the Curt hitch installed on the vehicle in the instructions I have linked for you. Since you will be carrying bikes with this hitch you will need a bike rack that is compatible with a Class I trailer hitch. Class I trailer hitches can only carry up to 2 bikes maximum because the hitch cannot withstand...
  view full answer...


• Could Curt Hitch for 2012 Mazda 2 Tow a Motorcycle Trailer with Kawasaki Ninja 250R
• ThCurt trailer hitch part C11073 has a towing capacity of 1,500 lbs total trailer weight and 150 lbs tongue weight. If you were planning on towing your Ninja on a small trailer that weighed less than those capacities this would work well for you. You will need to check the owner's manual of your 2012 Mazda 2 though for towing capacities on the vehicle and be sure not to exceed the lower of the two figures. For a ball mount you would want part # 3593, for a ball part # 19256, and for trailer...
  view full answer...


• Need a Vehicle 7-pin Round Adapter to Connect to a Boat Trailer 5-Pin Flat
• We do offer several adapters for a 5 pin flat to a 7-way blade vehicle connection. If your van connection point is a 7-blade configuration then you can use the Optronics # A75TB. This is an adapter that will plug into a vehicle 7-way blade style connector and will attach to your 5-pin flat boat trailer wiring connector. If your van has a 7-way round pin vehicle connection pin, unfortunately we do not offer an adapter for that configuration. However, there is an option, and I recommend...
  view full answer...


• Tow Bar Wiring Recommendation for a 2013 Mazda 2
• For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. For applications that have separate lighting like yours, this kit will cause your brake lights to...
  view full answer...