You are going to need to install a 7-way trailer wiring socket on your vehicles (the 2015 Silverado already has one), so that you can activate the trailer lights and then install a brake controller to activate the EOH brakes of your trailer.
You will need to start with a 4-way (if you do not have one). For that you would want the # 119250KIT.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller... view full answer...
Since you have a 34 inch wide frame, we may have something that could work with a bit of fabrication on your part. 34 inch wide frames (measured from outside to outside) is a very common frame width for cab and chassis trucks, so we do have options for those beyond the universal RV style hitches.
I recommend looking at part # 41947. This hitch fits a 34 inch wide frame and has several height adjustments on the brackets so the receiver can be adjusted to a few different heights. I've attached... view full answer...
If you need to keep the 7-Way semi active on the truck, then you would need to make an adapter to get it to work with an RV 7-Way. For that you would need a trailer side 7-Way round, # PK11702, a converter, # RM-732, and a vehicle side 7-Way RV style, # PK12-707E.
A semi-7-Way has separate circuits for the brake lights and each turn signal. And RV style 7-Way has the brake lights combined on the same circuit. So, what you would do is use a circuit tester such as # PTW2993 to determine... view full answer...
The motor included with the Replacement Gear Motor for Bulldog Electric Powered-Drive Kit # BD1046130-00 that you referenced is not available separately. In order to replace the motor on your Bulldog Jack, you will need to obtain this Gear Motor Assembly.
I have attached a short video demonstration on this product that you can also take a look at. view full answer...
Go To Results