Expert Answers about Chrysler 300
- Is There Fascia Trimming Required to Install Trailer Hitch on 2014 Chrysler 300
- I checked the install instructions for the Curt hitch part # C13093 that you referenced which is a fit for your 2014 Chrysler 300C and there is no mention of rear fascia trimming or removal so that's not something you would have to worry about.
Now for a trailer wiring mounting bracket the part # 18144 would be a great option to use to hold the 4-way connector of the part # C56145 which is a fit for your vehicle as well. This bracket actually attaches to the rear bumper of the vehicle...
view full answer... - Cargo Carrier And Hitch For 2011 Chrysler 300 To Carry Folding Wheelchair
- If you do not have a hitch on your 2011 Chrysler 300, I recommend a hitch and a cargo carrier. After doing some research on your vehicle I found that the towing weight capacity is 1,000 lbs. that means the maximum tongue weight capacity or total weight a hitch could handle is approximately 100 lbs.
I recommend the Draw-Tite Trailer Hitch, part # 36548. This is a Class ll hitch and has a 1-1/4 inch receiver opening.
I also recommend a flat hitch-mounted cargo carrier like the Rola Packer...
view full answer... - Best Trailer Hitch Receiver For 2014 Chrysler 300 For Electric Scooter
- Really and truly there's only one option for a hitch on a 2014 Chrysler 300 with the heft to carry something as robust as an electric scooter, and that's the 2 inch hitch from Draw-Tite:
- Draw-Tite Max-Frame Trailer Hitch Receiver # 76145
The # 76145 has a 4,500 lb towing and 675 lb tongue weight capacity, both of which are far ahead of what any other hitch for this vehicle can offer. Your customer will need to keep in mind they are limited by the lowest-rated factor, so they'll need...
view full answer... - Best Tire Chain Recommendation for Tire Size 245/45-20 for 2019 Chrysler 300
- For the tire size of 245/45-20 that you have on your 2019 Chrysler 300 the best and easiest tire chain option is the Konig part # TH04115250 which literally install and remove in a matter of seconds, provide great traction, and will last a very long time. I attached an install video for more info on them and to show you how easy the install is.
Other options will take much longer and often times require laying or sitting down on the ground to install which will be a mess in the snow whereas...
view full answer... - Trailer Wiring Harness Recommendation for a 2011 Chrysler 300 LDT
- For your 2011 Chrysler 300, we offer the Curt T-Connector, # C56145.
I have attached an installation video on a 2013 Chrysler 300 for you to check out.
While this is a plug and play unit, you will have to run the main power wire up to the vehicle battery. These wiring harnesses require a direct 12v connection to the battery to power the trailer or accessory lights. This is to protect the vehicle's tail light circuits from overloading. I have attached a help article on tips for routing...
view full answer... - Concealed Trailer Hitch for 2020 Chrysler 300
- I can understand wanting to keep the appearance of your 2020 Chrysler 300 as clean as possible, and the perfect trailer hitch for your car is the Draw-Tite Trailer Hitch Receiver # 36548 because it has a concealed crosstube with only part of the receiver showing, as you can see in the accompanying photo of this hitch installed on a Chrysler 300.
This hitch has a 1-1/4 inch receiver will be a perfect hitch for a bike rack such as Hollywood Racks Trail Rider 2-Bike Platform Rack # HR200Z...
view full answer... - Troubleshooting Curt Trailer Wiring Kit # C55546 Not Active After Install
- Check to make sure the fuse is in the fuse holder of the Curt trailer wiring kit part # C55546 as well as the white wire is grounded properly. Typically when this problem arises the issue is the fuse not being installed.
view full answer... - Which Transmission Line of 2005 Chrysler 300 is Return Line for Installing Transmission Cooler
- Your 2005 Chrysler 300 has the 42RLE transmission in it which means the top line is the return line and the line the cooler should be installed on like the # D15902 and the bottom line is the send line.
view full answer... - Recommended Trailer Hitch and Parts To Tow a Trailer with a 2008 Chrysler 300
- The Draw-Tite Max-Frame Trailer Hitch Receiver part # 76145 is what I recommend for a 2008 Chrysler 300. It has a class III rating with 2" receiver tube opening which will allow for a greater towing capacity and more ball mount options to choose from when compared to the other class II, 1-1/4" receiver tube options. In order to complete your towing setup you'll need a wiring harness, the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55546 and a ball mount/hitch...
view full answer... - Is Drilling Required To Install a Trailer Hitch On a 2019 Chrysler 300
- The trailer hitch options for a 2019 Chrysler 300 don't require drilling, they install via pre-drilled holes in the frame. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76145 which has the larger class III, 2" receiver tube opening which is more versatile than the class II, 1-1/4" opening in regards to towing, bike racks, and cargo carriers.
In regards to trailer wiring, the T-One Vehicle Wiring Harness part # 118658 is what you seek as it's a direct fit or plug-in-play....
view full answer... - Trailer Wiring Harness Recommendation for a 2008 Chrysler 300
- You are going to have to install a wiring harness with a converter box to be able to install a 4-way on your 2008 Chrysler 300. You are correct, because the taillight circuits of your vehicle are separate and the taillights on most trailers are combined a converter box is required.
The Curt wiring harness part # C55546 would be the correct harness for your vehicle and would install pretty easily.
view full answer... - Roof Vent for a 1968 Streamline Travel Trailer
- We have several vents that might work for your Streamline trailer but nothing that is made specifically for it. I have included a link to the right to the options for you. Most of the vents require a 14-1/4 inch square opening to install the vent.
The majority of the vents have plastic lids with a few exceptions that have metal lids. Beyond that it is just a matter of the color you want: white, blue, smoke, silver, clear, and metal.
I also recommend the vent installation kit # 344270KITW.
view full answer... - Ball Mount Recommendation for 2013 Chrysler 300 with Curt Class III Trailer Hitch
- For the Curt Class III Trailer Hitch # C13093 on your 2013 Chrysler 300, you will not need to use any specific ball mount. The ball mount you will want to use is the one that provides the correct rise or drop needed for you to tow your trailer level.
I have attached a help article on how to determine the needed rise or drop for your trailer.
A great ball mount kit option is the Ball Mount Kit for 2 Inch Hitches # 989900. This ball mount kit will provide you with a ball mount that offers...
view full answer... - Trailer Hitch Receiver Fit For 2012 Chrysler 300
- We can help you out with a trailer hitch receiver for your 2012 Chrysler 300, and there is one option for you that I recommend, which is a hitch from Draw-Tite:
- Draw-Tite Max-Frame Trailer Hitch Receiver # 76145
This hitch has tongue weight capacity of 675 lbs, which is the highest capacity of any hitch that fits your Chrysler, and will do a great job for you whether you are using it for some towing or accessories.
view full answer... - 3 Bike Platform Bike Rack Recommendation for 2007 Chrysler 300
- For a 3-bike platform rack the Kuat Transfer part # KU24FR would be a great option. We had the chance to test fit this rack on a similar 2015 Chrysler 300 and it fit and worked well. Check out the review video I attached that shows this. Platform bike racks are normally really heavy, especially ones that carry over 2 bikes like this one. The Transfer is relatively light all things considered at 51 lbs. Most similar racks are near 100 lbs.
If you are in need of a hitch you'll want the 2...
view full answer... - Recommended Hitch and Related Towing Components for 2008 Chrysler 300
- Two sizes and weight classes of hitch are offered for your 2008 Chrysler 300. These include several of the 1-1/4-inch Class II type and one of the 2-inch Class III type. All things being equal I suggest the 2-inch Class III hitch # 13465 from Curt since this size hitch will be more widely compatible with a range of hitch-mount accessories like bike racks and cargo carriers. An install video is linked.
All you will need to add is the hitch ball, either a 1-7/8-inch (# 19256) or 2-inch...
view full answer...
Go To Results