Expert Answers about Infiniti G37

• Parts Needed to Mount Ski and Snowboard Carrier on 2009 Infiniti G37x
• In order to carry skis or snowboards using a rack like the Thule SnowPack Ski and Snowboard Carrier - 6 Skis or 4 Boards - Black # TH7326B, you will need a roof rack system since these do not mount to naked roofs. If you've got a factory roof rack system, the # TH7326B, # TH7325 and Kuat Switch 4 Ski and Snowboard Carrier - 4 Pairs of Skis or 2 Boards # KU94FR are designed to fit on factory roof rack crossbars, so they would all work without any additional parts. If you don't have a roof...
  view full answer...


• Parts Needed to Tow With 2012 Infiniti G37X Sedan
• You can tow a trailer with your 2012 Infiniti G37 sedan, you just need to make sure you stay under the capacity that Infiniti sets for this vehicle. To find this out you'll need to contact Infiniti as there was no official capacity listed in the owner's manual I looked up online. The parts you need to tow with your 2012 Infiniti G37 sedan are the following: Curt Trailer Hitch Receiver # C11499 T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118480 Curt Class II Drawbar...
  view full answer...


• Recommended Roof Rack for 2011 Infiniti G37 Compatible with Yakima ForkLift
• You are correct that the Yakima ForkLift # Y02098 will fit on most crossbars, so you won't be limited to any particular bar style, but there are some advantages of using aero style bars including the reduction of wind noise during travel. If you're planning on driving any distances with your bike, the wind noise can be a bit annoying, but using a roof rack with more aerodynamic bars can help reduce that quite a bit. For this reason I recommend using the Rhino-Rack ROC25 Roof Rack for Naked...
  view full answer...


• Anti-Rattle Device for Use with Hitch Adapter
• Any hitch adapter/extender product such as 2-inch-to-1-1/4-inch adapters # HTAD and # HT5R can introduce the potential for some rattle. But we do offer anti-rattle devices that can take most of the slack out of such systems to reduce rattle and noise. In your 1-1/4-inch hitch (or in a 2-inch) you can use part # RM-061-125 which is shown in the linked video. Do note that any hitch adapter will reduce the hitch's rated capacity by 50-percent.
  view full answer...