Yes, the Tekonsha Plug-In Wiring Adapter, # 3035-P, can be purchased separately from the Tekonsha Primus IQ Brake Controller, # Tk90160.
The OEM harness on your 2009 Lincoln Navigator will be located up under the dash near the center console. There will be a 6-pin connector that mates with the one on the adapter at the end of the harness. view full answer...
The Curt Trailer Hitch Receiver part # C13194 comes with all of the hardware you will need for installation including the fish wires you mentioned. I have linked an installation video for you to check out that will show you the step by step process including the use of the fish wires. Check it out. view full answer...
Yes, the Lippert Kwikee 32 Series Electric Step part # LC372261 comes with the motor, linkage, control board, switch and everything else you need to use them. The mounting plate is 25-1/4" wide x 11-3/8" deep which you will need to make note of during installation. The entry height is 13-1/2" tall.
I have attached a review video of the steps for you as well which you can see the components in. view full answer...
Yes, all of the hardware needed for installation is included with Curt trailer hitch # C12130. If you plan on doing some towing you can use the nifty Curt Euro ball mount # C45592 for a 2 inch ball or # C45591 for a 1-7/8 inch ball. And for trailer wiring you can use # C59496 to add a 4-Way flat to the rear of the vehicle. view full answer...
Yes, Draw-Tite trailer hitch # 41116-011 does come with 3/8" spacers. The 41116 is the hitch and the -011 is for the spacers. Four spacers are included. view full answer...