Per the installation instructions for the Curt Trailer Hitch, part # 13364 that you received for your 2014 Town and Country, the vehicle's existing hardware is used to install the hitch.
You need to make sure you do not misplace the hardware when removing it form your vehicle. Also, you will need a torque wrench like part # ALL944001 to tighten the hardware when installing the hitch.
If you are unable to find all of the hardware needed for installation, we do offer the hardware kit.... view full answer...
For the 2006 Chrysler Pacifica, the 20 amp fuse required for installation of the T-One Vehicle Wiring Harness, # 118303, is included with the harness.
I have included a link to the installation details and a link to a video showing a typical installation of this wiring harness. view full answer...
Yes, all of the trailer hitches for the 2004 PT Cruiser include all necessary installation hardware. Keep in mind that depending on the hitch you pick you may need to purchase the ball mount, pin and clip. Also you will need to purchase the appropriate sized hitch ball. You may also be interested in a wiring harness. Part # C55532 is a custom fit for your vehicle. view full answer...
The K-Source Universal Towing Mirror # KS3891 that you referenced comes in a quantity of 1. You will need to change the quantity to 2 when adding it into your cart if you would like a pair of them. view full answer...
Yes, the WeatherTech Floor Mats, # WTW16TN, for your 2006 Chrysler Town and Country do include the drivers side and passenger side mats. view full answer...
The Draw-Tite Sportframe Trailer Hitch Receiver # 24919 includes all of the necessary hardware for installation including the bolt leaders.
If you need replacement hardware use # RHK and entire the hitch's model number and manufacturer. The replacement hardware kit will also include the bolt leaders included with the hitch originally. view full answer...
You can reuse the same spindle nut and cotter pin with the Dexter Hub Assembly, # 8-213-5UC1. The reason hub assemblies do not typically come with new spindle nuts is because there are different types of spindles that require different types of spindle nuts and cotter pins or washers. For example, if you have an EZ lube spindle (see photo) with a grease fitting on the end, you will not want a cotter pin going through the spindle. In place of a cotter pin, you would use a castle nut and... view full answer...
Yes, all of our trailer hitch receivers, like Draw-Tite # 24919 that you reference, come in a box and with the hardware included. This trailer hitch receiver is confirmed to fit your 2015 Chrysler 200.
If you ever need replacement hardware you can order it on our site using part # RHK. You will simply go to the # RHK product page and select the hitch manufacturer and type in your hitch part number before placing your order.
I have attached a video of this receiver being installed on a... view full answer...