The Gustafson RV Vanity Light, part # 277-000324, is a surface mounted light fixture.
The mounting holes on the Black base are soaced 17-inches apart and are 1-inch tall. This light uses three 912 or 921 bulbs which are included with the light. view full answer...
There isn't a lot of information on the LED board for light fixture # 277-000330-331. I have included a picture showing it up close so you can see everything that I can see. It has a 6 watt rating total for the 30 LEDs on the board. It runs off of a 12 volt system but as far as amperage output that information and other technical data is not available. view full answer...
I spoke with the manufacturer and found out that the Gustafson RV LED Pendant Light # 277-000458 has a 352 lumen rating and is 3000K on the color scale, which will give you a warmer white color. view full answer...
The Gustafson RV Reading Light # 277-000334 has a color temperature of 3,200 Kelvin, which means it will have a hue emitting something between a yellowish and whitish light. With that particular color temperature there are going to be some slight variances per fixture, as you can see by the pair of photos I added of this light that customers submitted. As you can tell, one is emitting a whiter hue and the other is more yellow-tinted. view full answer...
I spoke with the manufacturer, Patrick Industries, and they unfortunately do not have a Lumen rating available for the 6-LED Surface Mount Dome Style Light # 277-000114, but we do have a similar option with the Optronics LED RV Interior Double Dome Light with Switch # RVILL34, which has a rating of 815 Lumens. view full answer...
LED lights such as pancake light # 277-000339 are typically brighter than their incandescent counterparts. The light draws 3 watts which is comparable to a 30 watt fluorescent bulb so that should help you to determine if the LEDs will be brighter than what you have now. view full answer...
I went to the warehouse and took a look at the Command Performance Double Tail Light, part # CE86FR.
Each of these assemblies has 20 LEDs. With high illumination this assembly would have a draw around .17 amps and at low illumination that draw would be about .01 amps. Since you are replacing the incandescent fixtures on your fifth wheel, these will certainly not draw much and would be brighter than the lights you have. view full answer...
I spoke with my technical contact at Canarm and confirmed that the Recessed Light Fixture with Gimble Trim Ring # 277-000135 is 120V AC. view full answer...
I was unable to find anything on a Bargman #69 fixture, but if you are referring to the light in the picture you included, that actually will be a #59 light, like the # 30-59-002. If you are looking for a replacement lens for the pictured light, the Replacement Amber Lens for Bargman #59 Series # 34-59-012 will be the correct part. view full answer...
We carry a lot of LED lights that would work great for you but they will probably have a different mounting than the recessed bucket you described.
I have attached a link to the LED lights we offer. You can see if the size of the lights we offer will work with the recessed buckets you have on your trailer. view full answer...
Since there is no type of cross reference available for taillights on RVs like your 2019 Forest River Grey Wolf 27DBH, in order to figure out how the correct replacement taillight, you will simply need to measure your taillight, which will determine the correct replacement.
Based on some photos I saw, it looks like you may have an Optronics light that measures 8-11/16" long x 3-3/16" tall:
- Driver Side: Low Profile LED RV Tail Light with License Bracket # RVSTLB61
- Passenger Side:... view full answer...
The 3-LED Surface Mount Dome Style Light Fixture part # 277-000113 will only draw around 0.1 amps because it has LEDs which draw very little power. In regards to lumens, this should be around 135. That said, these figures are all averages using the known wattage rating of 0.5 per diode and voltage of 13.6. I spoke with the distributor but they were not able to provide specifics on amp draw or lumens which is why I am only able to give estimates. view full answer...
I do have a potential solution for you. Now I do not have any light fixtures made specifically for a range hood, we do have other surface mount lights which may work for your application. The Great white LED utility light # PE63FV would be a great option. This light is 6-3/8" long and mounts using just 2 screws. You can wire it to a on/off switch like the # 37212225. This would have to be wired to 12v power and grounded. This would be a fairly easy add on which would surely be much brighter... view full answer...
Unfortunately, Optronics doesn't offer replacement lenses or bulbs for this model. The diodes aren't replaceable, so if they should ever burn out, the lamp itself would need to be replaced.
Although we don't offer a similar LED lamp that would be less bright than what you already have (most would be brighter), an incandescent lamp like # RVIL22 could be a good choice for areas where you're wanting lighting that isn't so bright. As you can see in the video I've linked for you, you can... view full answer...