The 24x60 Curt Cargo Carrier # C18151 is made in China. Curt has cargo bag # C18211 that you can use with this carrier. I have linked videos for both products for you. view full answer...
We have one of these set up in our show room and the zipper does go along three sides of the bag. These bags work very well at protecting the cargo on a carrier from the rain.
I have included a link to a video reviewing the bag. view full answer...
The Yakima EXO Swing Away Enclosed Cargo Carrier is made of water-resistant materials. Its hard plastic shell lets rain roll right off the carrier. However, the lid is attached with a hinge. If you know that you will be driving through a rainstorm, it is recommended that you wrap your cargo in plastic bags to ensure that it does not get wet.
For something to be considered waterproof it has to be able to be submerged under water for a certain amount of time and not let any water in. view full answer...
The Thule Outbound # TH868 bag is made of Thermoplastic elastomer (TPE) material which gives the cargo bag flexibility and strength without using potentially harmful PVC or pthalates. TPE is a hybrid material made from rubber and plastics that can flex and return to its original shape, increasing the cargo bag's strength and durability.
The 5 out of 5 stars rating is the average customer rating. For this particular bag, only 29 customer has taken the opportunity to rate the bag but they... view full answer...
The bag that is inside the Carpod Walled Cargo Carrier, # M2200-01-02, is weather-resistant but is not considered water proof. For something to be considered water proof it has to be submerged under water for a certain period of time and the inside and contents must stay dry. For general rainy conditions the bag will do well to help keep items inside dry but we still recommend placing items that cannot get wet in plastic bags. view full answer...
The Advantage SportsRack cargo bag # HE3021 is made out of a Heavy-duty, vinyl-coated, 600-denier polyester. This keeps it from ripping easily and helping to keep water out. view full answer...
The Curt Cargo Bag # C18211 referenced in your question is indeed a waterproof, soft-sided cargo bag that will do a great job of protecting your valuables from the elements. The heavy-duty, vinyl fabric features welded seams that will help to prevent any water leakage while traveling and a covering flap that will keep dirt and moisture from seeping in through the zipper.
This carrier measures 56 inches long, 22 inches wide, and 21 inches tall. I have attached a short video demonstration... view full answer...
Roof mounted cargo boxes are weather resistant, but not waterproof. Under severe weather conditions it is possible that some moisture could get into the box.
If you have something that absolutely cannot get wet, then we recommend putting it in a waterproof package first such as a sealed plastic bag before loading it in the carrier.
I included a great video review, picture and informative article for you too. view full answer...
Yes, all the required mounting hardware is included with the Curt Trailer Hitch Receiver # C13416. Also if you are looking for a cargo carrier to put on back of your RAV-4, I recommend the 24x60 Reese Cargo Carrier for 2" Hitches # 63153. This cargo carrier is great for models like the RAV-4 to free up more space inside your vehicle and are ideal for roadtrips.
Included is an installation video for more details on what steps and components are needed for the hitch and an overview of... view full answer...
Draw-Tite trailer hitch # 75673 for the 2016 Subaru Outback is made in Mexico. Curt trailer hitch # C13206, also for your 2016 Subaru Outback, is made in the USA. But, per Curt warranty requirements, all non-trailer loads (bike racks, cargo carriers, etc) must be supported by stabilizing straps, such as # 18050, sold separately. So if you are going to be using the hitch for anything other than towing you would need the strap.
If you are going to do some towing I recommend etrailer ball... view full answer...
The shank on the 20x48 Cargo Carrier for 1-1/4 inch Trailer Hitches, item # 63155, is a hollow 1-1/4 inch by 1-1/4 inch by 1/4 inch thick square tube. view full answer...
The 60x19 Curt Cargo Carrier for 2" Hitches - Aluminum - 500 lbs # C18100 is manufactured overseas, but it is made to USA specifications. We currently do not have any USA made carriers.
I've also linked a review video of this carrier for you to check out. view full answer...
The Curt Aluminum Cargo Carrier # C18100 features aluminum construction throughout, including the 2-inch tubular shank portion that fits into your hitch receiver. This material is responsible for the substantial reduction in the carrier's weight as compared to a similar Curt carrier made of steel. The aluminum carrier # C18100 weighs 29-lbs versus 40-lbs for the steel # C18109. Both feature the same 500-lb cargo capacity. view full answer...
We currently have three carriers made in the USA by LetsGoAero. They are both enclosed carriers. They are very high quality, but they are much more expensive. We have the the LetsGoAero models # H00604 and # HGK819.
We also have the Thule Transporter Hitch Mounted Enclosed Cargo Carrier - Tilting, part # TH665C. It is an enclosed carrier with inside dimensions 48-1/2" X 23-1/2" X 24" high. view full answer...
The Curt cargo carrier, # C18152, is made overseas.
We do have two carriers made in the USA. They are both enclosed carriers. They are very high quality, but they are much more expensive. We have the the LetsGoAero models # H00604 and # HGK819. view full answer...
The 24x60 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs, part # C18152, is engineered, fabricated, welded, finished, tested, and shipped out their facility in Eu Clair, Wisconsin.
I have included a video review link below. view full answer...
Although the Pro Series # 63153 is manufactured overseas in China, as you can see by reading the reviews the product received, it's very highly rated by our customers.
We do have two carriers made in the USA. They are both enclosed carriers. They are very high quality, but they are much more expensive. We have the the LetsGoAero models # H00604 and # HGK819.
Before choosing a carrier, you'll want to determine how much clearance exists between the hitch pin hole in your receiver and... view full answer...
The Flint Hill Goods Carrier # FHG77ZR that you referenced is made of steel, but it does have a corrosion-resistant black powder coat finish so it actually would hold up great in cold weather.
One of the listed, intended, uses is to carry a snowblower. As long as your snowblower can fit in the dimensions of the carrier and does not weight more than the capacity of the carrier and the hitch of your vehicle this should work very well for you.
The inside dimensions of the carrier are... view full answer...
The Curt Class I hitch, part # C11391, is made in the USA and includes a pin and clip. Note that if used with any non-trailer load, say a bike rack or cargo carrier, Curt requires you to use their stabilizing strap # 18050 which is not a requirement for the Draw-Tite.
A helpful hitch install video and article are linked for you. view full answer...