bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Kia Telluride


  • Troubleshooting Redarc Tow-Pro Liberty Brake Controller Install On 2021 Kia Telluride
  • I discussed your issue with a one of the training representatives from Redarc and while they have not before seen this issue with an install, he did have an idea of what might be occurring. The first thought is an insufficient ground for the installation of your Redarc Tow-Pro Liberty Brake Controller, # RED24FR. Or, interference in signal due to where the power is picked up to supply the controller. If you sourced the power from the fuse box and not directly from the 2021 Kia Telluride...
    view full answer...

  • Troubleshooting Trailer Running Lights Not Working When Connected to 2023 Kia Telluride OEM Wiring
  • It sounds like your good friends at the Kia dealership need to take another look at the wiring harness they installed on your 2023 Kia Telluride. When running lights aren't working on a trailer it either means something is wrong on the vehicle side or something is wrong on the trailer side. Since the 2016 Expedition trailer works just fine with your Tahoe that tells me the dealership didn't do something correctly with your installation, and I recommend confirming that on your end by using...
    view full answer...

  • Troubleshooting 2020 Kia Telluride 4-Way Not Power Trailer Lights
  • The answer to your question depends on which wiring harness you have. The Curt # CU94FR does have an in-line fuse on it. The Tekonsha 118784 does not have this fuse. If you have the Curt you can start by checking this fuse to make sure it is not blown. Assuming it is in good shape, you will need to locate the trailer connector fuse for your vehicle. This information should be available in your owner's manual. The lid of the fuse box should also have them labeled. More than likely it is...
    view full answer...

  • No Power to 12 Volt or Brake Pin on Curt 7-Way C68JR
  • It is very, very likely that the issue with no power to the 12 volt pin of the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # C68JR is due to a fuse either having been blown or not inserted, so definitely start there. Make sure the fuse that came with it is properly inserted and check your owners manual to see if there needs to be a fuse for the 12 volt from the factory tow package. As for the brake pin, there won't be power there unless you...
    view full answer...