Expert Answers about Jeep Car Organizer

• How to Wire a Trailer with Electric Brakes
• Those are the wires for the brake magnets. You will need to connect the black wire to the brake controller output wire on your trailer connector and you are correct the white wire will need to be grounded to a clean metal surface on the trailer. I have linked a diagram for you. The brakes get their power from the brake controller. It sends a signal to the magnet in the brakes to engage and that initiates the braking action. Since you already have a new 7-way connector for your trailer I...
  view full answer...


• How To Wire In The Hopkins 7-Way Molded Trailer Wire Connector
• I've attached a wiring diagram for the 7-Way Molded Trailer Wire Connector # H20044, however there is no guide available to tell us the wire color functions on the trailer so you'll have to test each wire in order to determine its function. If your current plug is still functioning then I recommend connecting to your vehicle and going through each function and testing the wires for power with a circuit tester # PTW2993 at the junction box of the trailer. Having replaced quite a few 7-pole...
  view full answer...