Expert Answers about International Trucks 4700 Series

• Installation of Tekonsha Prodigy P3 Brake Controller on a 1995 International 4700
• Yes, the installation of a brake controller is generally the same for vehicle's that have no factory tow package, which is what your 1968 Chevy C50 most likely needed as well. I have linked a Help Article on installing a brake controller from scratch for you to check out. For your 1995 International 4700 series, I recommend the # ETBC7 kit this will transform a 4-way connection to a 7-way vehicle connection. If you currently don't have a 4-way connection then you will want # C59496. ...
  view full answer...


• Can the Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receiver Be Bolted
• The Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receivers like part # 38023 all require welding. They are universal hitches which require fabrication and modification for installation. In order to achieve the full capacity of the hitch, there will need to be welds throughout for support.
  view full answer...


• Can a P3 Brake Controller be Installed in a 2002 International 4300
• Before you do anything else you will want to see if there is a brake switch above the brake pedal. If there is, then use a circuit tester such as # PTW2993 to test the wires. You are looking for one that only has power when you step on the brake pedal. If it has power with the head lights or turn signals on it is not the correct wire. A lot of vehicles with air brakes do not have this wire which connects to the brake controller red wire. Based on what I was able to find there should be...
  view full answer...