The camera pre-wiring on newer campers is basically just a power wire ran from the trailer running light circuit and a ground wire present on a connector that will easily plug into a specific brand camera. You can easily remove the connector and wire the remaining wires to the camera and you'd be set. view full answer...
If your 2021 Gulf Stream Vintage Cruiser Travel Trailer is pre-wired for the Drive Wireless RV Backup Camera System Item # 324-000002 it will be a simple plug in application. Since your camper is pre-wired there should be a mount on the back. Remove the face plate which should expose the plug for the camera. If there is not a mount there should be a cover over a hole with the plug in it. The camera comes with a wall mount. Simply plug the two ends together and mount the camera. Plug the... view full answer...