Expert Answers about Buick Regal

• Does K-Source Replacement Mirror for 2002 Buick Regal # KS62618G Connect to Heater Wiring
• The replacement mirror you referenced, K-Source Replacement Mirror for 2002 Buick Regal # KS62618G, does carry a heat function. This replacement mirror is intended for use on the Regal sedan that has electrically adjustable heated mirrors. It plugs in to the existing wiring for the heat function.
  view full answer...


• Installing Hardwire Trailer Wiring Harness On 2001 Buick Regal LS
• Unfortunately there is no plug-in kit available for your 2001 Regal, so to install a trailer wiring harness on your vehicle it will have to be hardwired. I recommend the Draw-Tite 4-Pole Hardwire Kit, part # 18252. I have attached a link to an installation video for this harness on a Century that will be similar. You need to access the wires at the back of the tail lights in the trunk of your Regal. You can use the included circuit tester to identify the correct wires to attach the harness to.
  view full answer...


• How to Determine the Wire Functions of a 4-way on a 2002 Buick Regal
• Most likely you would just use the black wire in place of the yellow wire, but I would recommend you wire by function that way you know exactly what is going to what. If this 4-way is on the vehicle connector I would use a circuit tester like our part # PTW2993 and test the functions on the 4-way by having a friend apply the different taillight functions and then use the circuit tester to see which wire has power. Check out the video I attached that shows how to do this. Now to test the...
  view full answer...


• Does Exhaust Need to be Lowered to Install Curt Hitch on 2017 Buick Regal
• You do not actually have to lower the exhaust on your 2017 Buick Regal to install the Curt Trailer Hitch Receiver # C12115.
  view full answer...


• Hitch Recommendation for a 2016 Mazda 6
• The Curt Hitch part # C11356 that you referenced has been confirmed to fit your 2016 Mazda 6 so I would recommend it for you. I attached an install video for you to check out as well.
  view full answer...


• Installation of Curt Trailer Hitch on 2001 Buick Regal
• While there is no installation video of Curt Trailer Hitch # C12225 on a 2001 Buick Regal, we have attached the installation instructions. This hitch is rated 5 out of 10 for difficulty. Ther is some drilling required and you must temporarily lower the exhaust during installation. It is noted that a bolt leader would make this install and easier task.
  view full answer...


• 4-Pole Wiring Harness Installation on 2002 Buick Regal
• The 4-Pole Wishbone Wiring Harness # A35W42B installs on a trailer and will connect to the mating vehicle harness to power the trailer lights. The double brown wires on this item allow easier connections to the running lights on both sides of a trailer. On your 2002 Buick Regal the 4-pole wiring kit you can use is part # 18252. Kit # 18252 includes a circuit tester to allow you to find the correct wire on the car to splice into each of the wires on the included vehicle-side 4-pole connector....
  view full answer...


• Brake Controller Installation on 2014 Hyundai Santa Fe
• If you're wanting to tow a trailer equipped with electric brakes using your 2014 Hyundai Santa Fe (and that's what it sounds like), you'll first need to install a 4-pole trailer connector. If your Santa Fe has the factory tow package, use part # C56332. Or, for vehicles without the tow package, use # C56184. Not sure if you have the tow package or not. You'll then need to choose a brake controller. A proportional controller like the Tekonsha Prodigy P2, part # 90885 would be an excellent...
  view full answer...