Expert Answers about Voltmeters

• Wiring a Brake Controller Into an Isuzu N-Series Truck
• Finding the cold side of the brake switch can be a little difficult, but not overly so. First, you want to be using a voltmeter or a circuit tester, like the # PTW2993. As this is the cold side, there should be absolutely no power running through the wire until the brake pedal is depressed. This would be the wire you will need to splice the red wire from a controller, like the Curt Spectrum # C51170, together with. Depending on how the vehicle is currently wired, you may need a few more...
  view full answer...


• How Many Batteries Are Needed To Boondock
• The Go Power Overlander Solar Charging System with Digital Solar Controller # 34282181 in peak conditions is going to recharge approximately 50-60 amp hours a day so you would need to gauge the amount of power you're going to use. To do this you would need to know the wattage needed per day for each item you plan on using and can then get the correct amount of panels and batteries to meet the need. Typically I recommend just boondocking in your driveway, if possible, to get a more accurate...
  view full answer...