If your 2011 Chevy Silverado has the stock, factory bed rail covers then you can install BAKFlip FiberMax Tonneau cover # BAK126101. If they are aftermarket covers I cannot guarantee fit since the Tonneau cover would have only been tested on models with stock covers. But since the Tonneau cover rails do not sit on the tops of the bed sides it is likely it would also work with aftermarket rail covers as long as they do not wrap around to the inside of the bed. view full answer...
The diameter of a 275/80R-22.5 tire is normally around 39-3/4 inches so you need a tire cover that fits 40 inch tires.
A good option for a 40 inch spare tire cover is Camco part # CAM45251 in black. The Camco tire covers are designed with an UV resistant fabric and a non-scratch lining so your wheels do not get damaged while covered. They are also designed with an elastic cord and an adjustable strap to tighten the cover around the tire. The Camco covers are a good affordable option but... view full answer...
Replacement vent covers are very specific in terms of what vents they will fit. Metal cover # BV0534-00 is designed to fit Ventline Ventadome roof vent model V2110. If your vent originally had a plastic cover chances are this metal one will not fit. I have included a link to the vent covers we carry. If you are not sure of the model number you will need to look at the hinge style on the existing cover and compare it to the hinges pictured on the product pages of the covers. view full answer...
According to Adco's fitment guide the Adco Deluxe RV Windshield Cover for Class C Motorhomes # 290-2523 would be a fit for your 2018 Leisure Travel Unity Motorhome on a Mercedes Sprinter chassis. This cover comes with built in mesh covers so that if you can open the cover and allow some air flow through the windows without having to remove the cover. The cover has built in door pockets and magnets to hold the cover to motorhome and prevent theft or windy conditions from removing the cover. view full answer...
I mean those do look like the support bows for a TruXedo tonneau cover but we need to make sure they are for the exact same cover as these will differ from cover to cover. If you have the TruXedo Edge Soft, Roll-Up Tonneau Cover TX898101 then the bows you have will work with the Replacement Cover # TX8981-CVR you're looking at.
If you have something else let me know and I can see if we have the replacement cover you're needing. view full answer...
Spare tire covers and standard tire covers are a bit different, because spare tire covers attach to the tire differently. They are for mounted spares so go fully around the tire, while wheel covers are for parked RVs. So you'll want wheel covers, and for your 2010 Winnebago View, based on my research you have 215/85-16 sized tires. You'll want to verify that, but so long as your tires are between 30" and 32" in diameter, the best option by far for covers are the following:
- SnapRing TireSavers... view full answer...
From what I was able find about your 2021 Flagstaff Shamrock 233S, it is 24' 10" long. We do have a cover for you, but given that length the Camco UltraGuard Class C/Travel Trailer Cover # CAM45741 would not be the correct cover because it would be slightly too short.
I recommend the Adco SFS AquaShed Cover for Travel Trailer # 290-52243. This cover will fit trailers that are 24'-26' in length. With your Shamrock being just under 25', this cover will work out nicely. The cover has a top... view full answer...
Replacement tarps/covers for tonneau covers, such as the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover # TX1117651, are designed to be replacements for specific models of tonneau cover; this cover is designed to be a replacement for the TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX581101 which fits your 2005 Chevy Silverado 2500 with a 6-1/2 foot bed.
So to put it simply, if you have the Lo Pro # TX581101 then the Replacement Cover # TX1117651 will fit. If not, I would... view full answer...
Unfortunately we do not carry the factory seal or a replacement seal for your factory Sport-Trac tonneau cover. The only option we have for you is a replacement cover. For a similar cover I recommend part # BAK26312. This cover is aluminium and looks similar to the factory cover. This cover offers one more folding panel than the factory cover and is a sleeker design while remaining light weight. view full answer...
To replace the missing lug nut covers on your Namsco Wheel Cover # NA7160B1 you'll need the Lug Nut Covers for Wheel Masters and Namsco Wheel Covers # WM9003-4. These covers will just snap into place give your Namsco wheel covers a finished look. view full answer...
Tonneau covers are very different in terms of style so there aren't any that are 69 inches wide exactly I can verify, but based on that, it sounds like you are looking for a tonneau cover that covers the side rails of your 2006 Ford F-250 or F-350 with an 8 foot bed; something with that width would be one that covers your rails.
There are numerous really good options that are economical and quality, depending on if you want a soft, roll-up cover or a hard cover. I have added a link to... view full answer...
No, the Manual Switch Kit for Pace Edwards BedLocker or UltraGroove Electric Tonneau Cover # 311-BL-1120 cannot be used with the PowertraxONE MX Hard Tonneau Cover - Powered # RT70222.
The PowertraxONE MX Hard Tonneau Cover - Powered # RT70222 can only be operated via the remote and installing the Manual Switch Kit for Pace Edwards BedLocker or UltraGroove Electric Tonneau Cover # 311-BL-1120 would void the warranty on the cover.
The Manual Switch Kit for Pace Edwards BedLocker or UltraGroove... view full answer...
The Clazzio Custom Seat Covers part # AL-EAGMB7511BK are designed to slip over the factory seat fabric, you wouldn't want to remove them as the covers could then have a loose fit and slide around, the specs for these covers are very exact so you wouldn't want to modify the outside of the seats in any way. These covers are very nice and not like many other aftermarket seat covers, it's hard to even tell there are covers in place as they look like factory. view full answer...
If your propane tank covers are Camco covers like the part # CAM40564 yes the replacement cover # CAM40566 would work. This isn't a universal cover though. view full answer...
The MaxxAir Vent Covers part # MA86JR and part # MA00-955003 both are just used to cover the vent to protect it from the elements. However, the MaxxAir FanMate part # MA00-955003 is designed for the high power fan models because it does allow almost complete air flow. The vent cover is taller so it allows the fan to open almost completely and restricts only 5% of the air flow. The FanMate RV Vent Cover can be used on a standard fan as well but if you have a high powered fan this is the... view full answer...
What you need is the Replacement Cover for Solera Awnings - Drive Head - Rear Cover - Black - Regal Style # LC643921. This is not for every single model of awning, but it is the correct one for you as Lippert does manufacture these and has verified it is right for your 2018 Keystone Springdale.
I have added a link to a video review of this replacement cover for you to take a look at. view full answer...
If your 2013 Chevy Silverado has the stock, factory bed rail covers then you can install BAK Revolver Tonneau cover # BAK79101. If they are aftermarket covers I cannot guarantee fit since the Tonneau cover would have only been tested on models with stock covers. But since the Tonneau cover rails do not sit on the tops of the bed sides it is likely it would also work with aftermarket rail covers as long as they do not wrap around to the inside of the bed. view full answer...
The Classic Accessories Stellex V-Hull Fishing Boat Cover # CA20144 is designed to fit snuggly on a 12'-14' v-hull boat. The width of the boat should not exceed 68" at the widest point. You want the cover to fit snug so that any wind that hits the boat will not allow the cover to move and possibly chafe, creating wear or damage to the cover.
For the outboard motor I recommend finding a cover that will encase the entire outboard. This will help prevent any critters from building nests... view full answer...
The UnderCover Triad covers the bedrails where the towers of the Telescoping Rack for TruXedo Elevate Rack System # TX46NV would sit so they would not be compatible. You would need a cover like the BAKFlip MX4 Hard Tonneau Cover # BAK46FR, which would sit inside the bedrails and leave space for the towers of the rack. view full answer...
There is one option we carry which has both the length and width needed to cover your 20' long and 8-1/2' wide enclosed trailer, the Classic Accessories PolyPro III Deluxe Travel Trailer Cover # 052963732634.
This cover is designed for trailers that are from 20 to 22 feet long and it has a width of 102 inches, which is exactly 8-1/2 feet, like your trailer. This is important because most covers are not this wide so they wouldn't be able to fit over your trailer. The Classic Accessories... view full answer...
Go To Results