We do have a set of crossbars for your 2020 Lincoln Navigator but the Curt # C18118 isn't a fit. The clamps don't line up correctly so it won't stay on.
Instead, the rack we carry that fits your Aviator are the SeaSucker Monkey Bars part # 298-SX6000B.
The Monkey Bars are universal because they connect to virtually any vehicle using vacuum cups. I've attached a couple of videos, one of a different SeaSucker on a VW bus that shows the strength of the vacuum cups. view full answer...
The Thule roof rack kit that fits the flush rails on your 2022 Lincoln Aviator includes the following parts:
53" WingBar Evo Crossbars - Black # TH711420 or Silver # TH711400
Evo Flush Rail Feet - # TH710601
Fit Kit - # TH66RV
Or for the WingBar Edge you need the following:
41" WingBar Edge Crossbar - # TH86SC (you need 2 of this)
Flush Rail Feet - # TH89SC
Fit Kit - # TH66RV
You can use the Lock Core Kit # TH450400 to add locks to either roof rack setup I mentioned above. view full answer...
For your 2004 Lincoln Aviator there is not a custom towing mirror available like # CM11600. However, we offer several universal-type mirrors that would work for you. You can see the universal towing mirrors by clicking on the provided link.
The K Source Universal Clip-On Extra Large Towing Mirror # KS3891 is our best seller. This item will fit your existing mirror as long as the mirror housing has a lip running around the edge for the mounting hooks to attach to. These mirrors are sold... view full answer...
Because the cross bars on the Malone # MAL73FR EcoSport trailer are further apart than cross bars on a vehicle, you will need to use the Rhino-Rack # RRRBC050 Roof Bike Rack. You will have determine if you have space for two bikes. The width of the cross bars is 54" and you will have to subtract the width of your kayak. From that result determine if you have room room for your additional bikes. I bet you will. view full answer...
The best hitch for your 2023 Lincoln Aviator is going to be the etrailer Hitch item # e29YR. This hitch is custom fit and bolts to your Lincoln with included hardware.
I really like the etrailer hitch because the crossbar installs behind your rear bumper cover leaving only the 2" x 2" receiver visible. This is a class III hitch with a 2" receiver. It has a 6,000 lbs towing capacity, and a 600 lbs maximum tongue weight.
I have linked a couple of pictures below along with an installation... view full answer...
Yes, for your 2023 Lincoln Aviator you will need the etrailer Trailer Hitch Receiver # e29YR. This is a custom fit receiver which will give you a 2" receiver opening for your hitch mounted accessories and ball mounts.
The T-One Vehicle Wiring Harness # TK84FR is also a custom fit for your Aviator using factory style connectors to connect to your tail light wiring. You will need to run the included power wire to your battery to power the module which is what sends power to your trailer... view full answer...
I'm happy to report that we do have a trailer hitch and wiring for your 2023 Lincoln Aviator. For a hitch I recommend the Curt # CU78FR. This Class III hitch has a maximum gross trailer weight of 6,000 lbs and a 2" receiver. It features a concealed cross tube, gloss black powder coat finish, and comes with a lifetime warranty.
For wiring, the most reliable option is the Tekonsha T-One Vehicle Wiring Harness # TK84FR. The T-connector will plug in behind your taillights providing you with... view full answer...
The Rhino-Rack cargo basket # RMCB is designed to fit on crossbars that are up to 3-1/2 inches wide by 1-1/2 inches tall. And the center to center distance between the front and rear crossbars needs to be 21 to 30 inches. As long as the crossbars on your 2004 Lincoln Aviator fit that description the basket will fit. This basket has an overall height of 7-13/16 inches.
For a basket that is a direct fit to the factory crossbars on your Aviator you can use the Yakima LoadWarrior, # Y07070.... view full answer...
Yes, the Redarc Tow-Pro Liberty Brake Controller item # RED52VR will fit your 2021 Lincoln Aviator but you may need an extra part to make it work. Ford didn't add in the factory ports on quite a few of their 2021 vehicles because of covid related parts shortages so you will need to hardwire one in. The main issue you will encounter is finding the brake switch and tapping into it. It will be a red wire coming off of your pedal. If you can not find it or it is not large enough to tap into... view full answer...
Go To Results