All you need to do is measure the shackle strap length on your toy hauler to find the correct wet bolt kit. You'll want the shackle straps to be the same length (or as close to it as possible), and there are two options for that:
- MORryde Suspension Upgrade Kit for Triple Axle Trailers - 3-1/8" Long Shackle Straps # MR26ZR
- MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps # MR86ZR view full answer...
To find the correct replacement landing gear set for your 2014 K-Z Inferno you'll need to make sure that it has enough capacity to handle at least 25% of the trailer's GVWR and then check the measurements for the weld-stops to see if you can reuse your current mounting brackets instead of cutting them off and welding on new ones. For the spacing you'll want to measure the distance from the bottom of the upper weld stop to the top of lower weld stop and the distance from top of the upper... view full answer...
You'll need to take some quick measurements to determine the correct Curt Flex Air pin box for your K-Z Inferno 3710, as we don't have any way of knowing what pin box you had on it. The measurements are simple, as they are just the distance between bolts.
I have added a link below to a help article called "4 Steps to Choosing Your 5th Wheel Pin Box" and if you scroll down a bit in the article, it walks you through the measurements that are needed. Once you determine the pin box you have,... view full answer...
The Torflex Lift Kit - Tandem Axle - 3-1/8" Lift # K71-725-02 is designed for a #12 Torflex Axle. What you have here is a spring axle.
In order to lift your trailer I recommend the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00. This kit allows you to move your double-eye leaf springs to the top of the axle providing you with the lift you're looking for. I have attached a review video for your reference. view full answer...
Go To Results