The storage dimensions of the Camco Sidewinder RV Sewer Hose Support System # CAM43031 is 8-1/2 inches wide x 9-3/4 inches tall x 6 inches deep. It is a small storage space for the 10 foot expanded length of this product to keep your sewer hose from retaining waste. view full answer...
The bottom height of the hose that's being used on the Sidewinder RV Sewer Hose Support System, part # CAM43031, starts at 7-1/4 inches and goes to 4-1/4 inches.
I've attached a diagram for you. view full answer...
The Camco RV Aluminum Folding Sewer Hose Support # CAM40351 has a starting height of about 13-1/2 inches tall and then tapers down to about 7 inches at the other end.
That is the only aluminum sewer hose support we have available. view full answer...
The height of the Camco Sidewinder RV Sewer Hose Support System # CAM43031 is not adjustable. One end will be 9-3/4 inches tall and the other end will be 6-3/4 inches tall with the height gradually changing in between those heights. The system can extend from 6 inches to 10 feet long. The elevation protects the hose from damaging elements on the ground as well as ensures your sewer waste doesn't get backed up in the hose.
I've attached videos to assist. view full answer...
The half-pipe connector 365052 is designed to fit half-pipes that are 2 inches tall and 4 inches wide. It is a replacement for the ones included with Lippert Flow Down RV Sewer Hose Support Systems such as # LC365053. view full answer...
The Lippert Flow Down RV Sewer Hose Support System # LC365053 referenced in your question can slide along the included support legs for a maximum height of 9-1/2 inches.
This is a really neat support system that includes 4 sections of 30 inch long half-pipes so you can use just the length you are needing. If all the sections are used, it will give you a total length of 10 feet. view full answer...
The Lippert Flow Down RV Sewer Hose Supposrt System # LC365053 referenced in your question includes 4 sections of 30 inch long half-pipes that can be assembled to the length you are needing. If all the sections are used, it features a total length of 10 feet.
The system includes 4 half-pipe sections, 10 support legs, 3 double-ended connectors, 2 single-ended connectors, and a convenient storage bag. view full answer...
The Valterra Adjustable RV Sewer Hose Carrier # A04-5094 has a bracket-to-bracket hole separation of 48-7/8-inches when fully compressed and of 92-1/2-inches when extended to its maximum length. The center to center hole spacing on each individual bracket is 5-1/4-inches.
The third mounting bracket is not fixed to either half of the telescoping tube and it slides to the best position to support the carrier.
Please refer to the linked photo I prepared for you. view full answer...
The lengths of the RV sewer hoses are listed by the expanded dimension. For example, the RhinoFLEX sewer hose part # CAM39761 that you referenced is 15 feet when stretched out but when compressed for storage measures 52-3/4 inches overall. In feet that's a little over 4-1/4 feet. view full answer...
The Quick Drain RV Sewer Hose # D04-0120PB referenced in your question measures 10 feet long when it is fully extended. I went out to the warehouse and measured a length of 11-3/8 inches when the hose is in its retracted/compressed position. This is a really nice sewer hose that features a bayonet fitting at one end that will secure to the RV's waste valve.
This hose also comes in a 20 foot long model, with part # D04-0121. The retracted/compressed length of this hose is 23 inches.
I... view full answer...
While we have an option for you, both of the hoses from the EZ Coupler RV Sewer Hose Kit - (2) 10' Long Hoses # D04-0115 will be 50 inches when collapsed, which is too long for your 4 foot bumper. You can use one of the 10 foot hoses, the EZ Coupler RV Sewer Hose Kit w/ Swivel Fitting and 4-in-1 Clear Adapter # D04-0114, which will collapse to 25 inches, but that is actually going to be the longest hose available that fits in a 4 foot bumper space, but its fitting will require about a 5-1/2... view full answer...
The Viper RV Sewer Hose - Gray - TPE - 2' # D04-0402 measures 13 inches when compressed and has a lug to lug measurement of 4-1/4 inches which will fit in most standard bumpers but I recommend measuring since the spacing puts the lugs in the corners where there is more room. If you are replacing your sewer hose, you will want a longer hose than 2 feet, so I recommend the Viper RV Sewer Hose Kit w/ Swivel Fittings and 4-in-1 Clear Adapter - (2) 10' Long Hoses # D04-0475 which will have... view full answer...
I went out to our warehouse for you and measured the Prest-O-Fit Adapter for RV Sewer Hose part # PR66FR, the inner diameter of hose side is right at 2-3/4".
I can't confirm fit with the FloJet Macerator Pump unfortunately as this is no something we offer. view full answer...
The Viper RV Sewer Hose Extension w/ 3" Swivel Fittings # D04-0410 is 3" in diameter with the swivel fitting measuring 4-1/8" in diameter, so it would not fit your 4" square bumper.
It will however fit inside the 4-1/2" opening of the Valterra RV Sewer Hose Carrier - Black # A04-3460BK or # A04-3460 for white. view full answer...
The RhinoEXTREME RV Sewer Hose Extension part # CAM39863 has a collapsed length of about 5' 6" it compresses almost 50% of its extended size. view full answer...
There is indeed a shorter, 10 foot long version of the 20 foot EZ Flush Replacement RV Sewer Hose # D04-0054. The exact part you are looking for is the following:
- EZ Flush Replacement RV Sewer Hose - 10' Long x 3" Diameter - Silver Vinyl # D04-0050 view full answer...
You were real close with your guess! The 15 foot RhinoEXTREME RV Sewer Hose # CAM39861 has a compressed length of 6-1/2 feet, or 78 inches.
I have added a link below to a video review for you as well of the RhinoEXTREME RV Sewer Hose # CAM39861. view full answer...
When compressed the RhinoEXTREME RV Sewer Hose Extension # CAM39865 measures approximately 27 inches long. I have linked a video review of the hose for you. view full answer...