Expert Answers about GMC Acadia

• Curt Versus Draw-Tite Trailer Hitch Receiver For a 2021 GMC Acadia
• The Draw-Tite Max-Frame Trailer Hitch Receiver # 76023 and Curt Trailer Hitch Receiver # C13293 will not require stabilizing straps. I have put in to have that note removed as Curt does not recommend the straps with this receiver. I recommend the Curt as it will be the easier receiver to install given you will not have to remove the bumper fascia to complete the installation. We have the 4-Way Harness # 118720 and the 7-Way Harness # 118276 that will plug into the factory connectors that...
  view full answer...


• What is the Difference Between Hopkins # HM47365 and Pollak # PK12716 Wiring Adapters
• Both the Hopkins # HM47365 and Pollak # PK12716 wiring adapters allow a tow vehicle with a 7-way blade-style trailer socket to connect to a trailer that is equipped with a 4-pole flat connector. Both plug in to the socket on the vehicle and provide a receptacle for a 4-pole flat trailer connector. The difference between them is that the Pollak adapter is a single piece while the Hopkins adapter uses two separate sections linked by a short length of wiring. In some applications these flexible...
  view full answer...


• Comparing Curt and Draw Tite Trailer Hitches for 2020 GMC Acadia
• We have two hitch options for your 2020 GMC Acadia. We have the more hidden but harder to install Draw Tite part # 76023 and the easier to install but more visible Curt # C13293. It really comes down to what you value the most. If you want a shorter install time that's less invasive you should go with the Curt. But if you are one of those people who hates the look of a hitch hanging off the back of a vehicle the DrawTite is easily the way to go as it allows you to reinstall the rear...
  view full answer...


• How to Identify Right Versus Left Trailer Ramp Springs
• The right and left trailer ramp springs # RS16933RH and # RS16933LH will install on the passenger and driver sides of your trailer ramp, respectively. Usually right hand springs will have a painted end for identification while left springs do not.
  view full answer...


• Curt vs. Draw-Tite Trailer Hitch Receiver For 2021 GMC Acadia
• Good question and we can definitely get you set up with the better option between the Curt Trailer Hitch Receiver # C13293 and the Draw-Tite Trailer Hitch Receiver # 76023. There are a few important differences to take note of, which is their visibility, clearances, and install. Let's start with the visibility, as the Draw-Tite has a hidden crosstube, while the Curt hitch has a visible crosstube, so you're going to see the entire body of the Curt hitch, so the Draw-Tite allows a much...
  view full answer...


• Comparing Curt and Draw-Tite Hitches for a 2022 GMC Acadia
• The main difference between the Curt # C13293 and Draw-Tite # 76023 hitches for your 2022 GMC Acadia is the style of how it looks once installed. The Draw-Tite fits a little more snug up to the bumper of your vehicle and it's what I recommend going with because it looks a bit more clean. Aside from that they have different weight ratings (but that doesn't matter because your vehicle is rated lower than both) and the install for both will look a little different. The Curt will be easier...
  view full answer...


• Difference Between Curt Wiring Harness # C56056 and the Tow Ready T-One Wiring Harness # 118451
• There really is no difference between the Curt T-Connector Wiring Harness, # C56056, and the Tow Ready T-One Wiring Harness, # 118451. They both provide the same function but are manufactured by two different companies.
  view full answer...