The only real difference between the Draw-Tite # 65052 and Curt # C31012 is the style in which they bolt to the frame. The Draw-Tite is going to have a bolt on each frame rail and one on the crossmember, whereas the Curt is going to have three bolts on each frame rail. The Curt hitch is a bit more aesthetically pleasing whereas the Draw-Tite is more of just a get the the job down and don't worry about looks kind of hitch. That being said, the only thing you'll see from from hitches is just... view full answer...
Without a weight distribution system, the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41930 is rated much better, but when used with your weight distribution hitch the factory hitch is rated better. Since your factory hitch is rated so well and has no rust, and you already have a weight distribution system, you are good to go with your factory hitch.
If you want more options for your hitch without weight distribution, then the Draw-Tite hitch would be a better option. view full answer...
The difference between the Curt RV Bumper Hitch # C19101 and the Curt RV Bumper Hitch # E-100 is the application. If you have a 4 inch square bumper you would want the # E-100, if you have a 2 inch x 4 inch rectangular bumper you would want the # C19101.
If you check out the pictures I attached you can see how the mounting plates are different distances apart. view full answer...
The Derale Hyper-Cool Remote Transmission Cooler Kit w/ Fan part # D13960 would absolutely provide greater cooler power than the Derale 25-Row High-Performance Stacked-Plate Cooler part # D52508. The reason for this is because the fan provides constant airflow which in turn translates to more cooling whereas with the standard cooler you would be subjected to the mobility of the vehicle for cooling power. If you find yourself in a lot of stop and go traffic then the cooler with a fan would... view full answer...
Both of the trailer hitches you mentioned are a great fit for your 2002 Chevrolet Suburban.
The Curt Hitch, part # 14080 is a Class lV hitch and it has a 2-inch receiver opening.
The Draw-Tite hitch, part # 41930 is a Class V hitch and it also has a 2-inch receiver opening. Both hitches have identical towing capacity and weight distribution capacity. If it makes a difference to you, the Curt hitch is manufactured in the USA.
If you plan on doing some towing you might be interested... view full answer...
Fit System is the economy brand of K Source. There are several brand names under the K Source umbrella. The K Source models seem to be the higher quality option. K Source mirrors # KS62093-94G for your 2011 Chevy Suburban have electric operation, heat, and turn signals. There is a less expensive set, # KS62077-78G, which has manual operation but no other options. view full answer...
The Draw-Tite front mount hitch # 65028 and the Curt Front Hitch # 31108 are very similar, but they are not the same hitch. This was not intentional, the manufacturers just so happened to come up with very similar designs for the hitch coincidentally.
Since both hitches are so similar and have the same capacities I would not be able to recommend one over the other as both would work very well for you. I attached installation instructions for both product for you to check out. view full answer...
Go To Results