We offer a wide range of trailer tie-down products that you can see on the linked page. You can click on Boat Straps to see all boating-related cargo straps and then select transom straps to see items like BoatBuckle G2 Retractable Ratcheting Transom Tie-Downs # IMF08893. Please feel free to let me know what type of tie-down you're looking for if you cannot find it on the linked page.
You can also submit a photo to show the type you're looking for. view full answer...
We do have a similar 2" x 20' tie down which is the BoatBuckle Pro Series Kwik-Lok Gunwale Tie-Down Strap - 2" x 20' - 400 lbs # IMF17637 which has the same working load limit (WLL) as the Erickson Cam Buckle Tie-Down Strap w/ S-Hooks - 2" x 15' - 400 lbs # EM51215 you were looking at, but gives you the extra 5' you are looking for.
I included a video for both of the products mentioned for you to take a look at. view full answer...
I think what you are looking for is the Concealed Mounting Kit for RodBuckle Retractable Fishing Rod Tie-Down # IMF14200-02. Most of the RodBuckle is behind the wall of your boat's gunwale. It is about as low-profile as you can get, and can be mounted to either the floor or the gunwale. view full answer...
The Ratchet Tie Down with Coated Hooks # E01418 do sort of look pink in the pictures but they are actually red like in the video I have linked for you.
I would go with black, # EM34420, since pink is not available. Black is not going to clash with the aesthetics of the super sweet racing boat. view full answer...
To use a rubber strap you would need to attach 2 or 3 straps, like the Erickson Rubber Tarp Strap, part # EM06741, together to be able to reach that length. I do not have a single rubber tarp strap that will stretch to 8 feet.
I do offer tie-down straps and ratchet straps that would be able to give you the 8 foot distance you need. A few examples would be the Erickson Retractable, Ratcheting Tie-Down Straps, part # EM34417, that is 9 foot long. Also, have three choices in the 10 foot length... view full answer...
I think you may be referring to the Mounting Kit # IMF14202 for the RodBuckle Retractable Fishing Rod Tie-Down Strap # IMF14200. We offer these items individually and together as a set as part # IMF14200-02. view full answer...
There are a couple of accessories for the Truck Hero Elevate Rack System part # TH92FR currently available like the Tie-Down Kit for Truck Hero Elevate Rack System - Qty 4 part # TH52FR this will give you 4 tie downs that can be put on the base sliding rails or on the cross bars themselves. They look very much like cleats like you see on a boat dock giving you the attachment point that you need to secure your cargo. They would also work as load stops to prevent whatever you have loaded... view full answer...
There are not specific mounts to carry a canoe on the DeeZee Invis-A-Rack # DZ951550, you can modify the cutout inside the Malone Deluxe Kayak Carrier with Tie-Downs - Foam Block Style part # MPG152 to make them work for your kayak. These pads are about 15" wide. If you need something wider, the Rhino-Rack # RRRWP03 would be a better choice at 21" long. Both of these will work to help reduce movement and keep help reduce any scratching/damage to your boat while in transit.
Both of those... view full answer...
It sounds like you are looking for a strap like the BoatBuckle Bow Tie-Down Strap with Loop End # IMF18741 or # IMF12811.
I have linked both above mentioned products to this page for your convenience. view full answer...
Yes, we do have a Rhino-Rack side loader. For that accessory, you need the Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading # RR-RUSL.
In order to use the Universal Load Assist, you will need a crossbar system and a kayak carrier on your 2021 Ford Ranger (bare roof). For a great compatible crossbar system, I recommend the following parts:
- Thule SquareBar Evo Crossbars - Steel - 53" # TH712400
- Evo Clamp Feet for Thule Crossbars - Naked Roofs # TH710501
- Fit Kit for... view full answer...
Powerhouse doesn't offer the strap as a separate item, but the BoatBuckle Gas Tank Tie-Down Strap, part # IMF05352 would work fine for you although it's going to be a bit longer than you need. You'll probably need to trim some of the length. To keep the nylon from unraveling, use a flame to melt the end of the strap. The strap measures 1-1/2 inches wide by 6 feet long. view full answer...
I recommend the Malone BigFoot Pro gunwale-style carrier # MPG112MD for use on your round Yakima roof rack bars. The BigFoot Pro features tall bases made of molded nylon for durability and corrosion resistance and it includes both load straps and bow/stern tie downs. Its 165-lb weight rating means it's good for kayaks and also for canoes. The similar Thule Portage Canoe Carrier # TH819 also fits your round bars but it has a slightly lower weight rating than the Malone. view full answer...
We do not offer any kayak carriers intended specifically for mounting on a hard tonneau cover but we do offer foam-block type kayak carriers that could simply rest on top of it and work well for you.
These are intended for transporting kayaks on a vehicle with a bare roof.
The linked page displays all such foam kayak carriers. These offer the advantages of low cost, very light weight and simple installation. They also require no drilling or modification to your hatch-style tonneau cover... view full answer...
We do offer some aftermarket roof rack fits for your 2017 Subaru Outback Touring Wagon that has raised roof side rails. The current options are from Rhino-Rack and can be seen on the linked page. You can choose either silver or black bars; many customers prefer the black bar set-up, part # JA7975, for its OEM-like appearance. For silver bars order kit # JA7956. Both racks provide a maximum load capacity of 165-lbs and I suggest a review of your owner's manual to confirm that the car's roof... view full answer...
The Tie-Downs for the Reese Elite for the Ram trucks are indeed sold separately as part # RP30145.
They are sold individually, so you'll need two of them. The tie downs are intended to be used in the rear pucks, according to Reese. view full answer...
We do have a car tie-down kit from Erickson that is very similar to the one you referenced, though the Erickson Tie-Down with the Multiplier Ratchet and Swivel Hook is no longer available. Instead, I recommend the Erickson Car Tie-Down Kit with Ratchet # 08504-05, which like the kit you mentioned, is 7 feet long, has 2 inch wide axle straps and a 10,000 lb break strength. Each also has a 3,300 lb safe working load limit which will affect how many straps you need. For example if the car... view full answer...
There is one available solution for frame mounted truck camper tie-downs on your 2018 Toyota Tacoma as long as your truck doesn't have the aftermarket Mopar rear-mounted kick out steps that are mounted under the bumper.
If you don't have that rear-mounted kick out step then you can use the TorkLift Camper Tie Downs # TLT2303 (front) and # TLT3307 (rear). The inserts slide into frame-mounted brackets when being used and easily remove for a clean, unobtrusive look when you don't have your... view full answer...
The Brophy Camper Tie Down # TDSF is a compatible fit for your 1973 Ford F-150/F-250/F-350 full size truck and will fit most campers up to 8 feet in length. I have included a link to the instructions for proper installation.
I also recommend the Brophy Camper Tie Down Hardware Package # TDHP for use with the Brophy Tie Downs. They have a capacity of 3000 lbs and I have included a link to the instructions for the proper installation of this product. view full answer...