I may have another option for you, but the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # c14006 you mentioned is only confirmed to fit select 2014-2019 GMC/Chevrolet 1500 trucks and will not fit your 2006 Chevrolet W-3500 or 2006 Isuzu NPR flatbed. At this time there is not a trailer hitch receiver confirmed to fit either of the vehicles you mentioned
Your best bet is to have a local welder install a universal trailer hitch receiver like the Draw-Tite # 41990-07 with 7" tall... view full answer...
The Isuzu VehiCROSS was offered in the U.S. market for model years 1999 through 2001. I checked for availability of base plates for this vehicle for all three of those model years and I show no fits. This could mean that either the car cannot be flat towed or that it can BUT the demand for the base plates was too low to be economically-worthwhile for base plate manufacturers. Only 4,153 of this car was sold in the U.S. This is a very low figure that would make development of base plates... view full answer...
Since you went to a taller vehicle all you need is a drop shank for the weight distribution system like the part # EQ90-02-4400 which will give you the ability to lower the head of the unit so you can tow the trailer level. view full answer...
For your 2002 Isuzu Rodeo the trailer kit I would recommend is the T-One kit part # 118360 which is a confirmed fit and installs by plugging inline with the vehicle taillight connectors. I attached an install video for this kit on a similar 2001 Isuzu Rodeo for you to check out as well. view full answer...
I checked the install instructions for the # 607-4 and step 2 requires the 1-1/4 inch long bolts:
Starting with the drivers side, remove the two steering unit bolts behind the bumper attachment box. Bolt a ¼” x 3”x 5 3/8” rear mounting plate to the frame as illustrated using the two supplied 10mm x 1.25 x 110mm bolts, hardware.
And then step 5 uses the longer 1-1/2 inch bolts:
Now, bolt the rear of the brace to the flat mounting plate using two ½” x 1½” bolts, flat washers, lock washers... view full answer...
Go To Results