bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Freightliner


  • Trailer Hitch for 2002 Freightliner Sprinter
  • The first generation of the Freightliner Sprinter in the U.S. covered years 1995 through 2006. We do show a hitch fit for the 2003 but not for the 2002, as you noted. It is possible that the Draw-Tite hitch # 75210 will fit but my contact there could not confirm this absolutely since they have not had one in for test fit. We do offer multi-fit RV hitches that feature adjustable brackets. You can see these on the linked page. These frame-mount hitches vary in their tongue weight (TW) and...
    view full answer...

  • Class V Trailer Hitch for 2015 Forest River SR340 Diesel Pusher Motor Home
  • We do not offer a custom-fit Class V hitch for your 2015 Forest River SR340 diesel pusher motor home but we do have universal-fit hitches that can work for you. Installation will just be a bit more involved than for a bolt-on hitch. For example, Curt offers their weld-on 2-inch Class V hitch # 15903 rated for up to 1500-lbs tongue weight and 15,000-lbs gross trailer weight. We also offer Curt hitch # 15902 for frames between 18-and 44-inches wide that offers about 10-inches of drop. Curt...
    view full answer...

  • Suspension Enhancement Available For a 2001 Fleetwood Expedition 34N on Freightliner XCS Chassis
  • The Roadmaster Rear Anti-Sway Bar # RM-1209-115 is currently the only suspension enhancement we have that will fit your 2001 Fleetwood Expedition 34N that is on a Freightliner XCS Chassis. You will need to confirm that your specific chassis uses air suspension with 3/4" U-Bolts on the rear axle.
    view full answer...

  • Mounting Hole Size and Spacing of Polar Fixed Grab Handle PLR6624-A
  • The fixed grab handles we carry like parts # PLR6618-SSP and # PLR6624-A are general purpose replacements; they are not an exact OEM replacement part for any given brand or model of trailer. The stainless steel handle item # PLR6624-SSP and the similar aluminum model # PLR6624-A both have a handle area that measures approximately 24-inches but the 3/8-inch mounting holes are spaced apart 32-inches on center. The item # PLR6618-SSP is an 18-inch handle whose mounting holes are spaced apart...
    view full answer...

  • Availability of Brake Controller Wiring Harness For a 2005 Bounder RV Diesel Freightliner Chassis
  • I do not offer a brake controller wiring harness for a 2005 Bounder RV with a Freightliner chassis that will plug into the Tekonsha Prodigy P2 Brake Controller, part # 90885. Usually on an RV there is not always a factory brake controller plug under the dash and if there is it can vary between different models so there is not always a location listed. You might check with the RV manufacturer and see if they can help you locate the brake controller wiring harness on your RV. Some RVs will...
    view full answer...

  • Center Front Floor Mat For 2010 Freightliner Sprinter Van
  • We do. Use part # WT442491 for our cargo van. The driver's, passenger's and center piece are all included.
    view full answer...

  • Prodigy P3 Brake Controller # 90195 Installation in 2015 American Coach Revolution Motor Home
  • Your 2015 American Coach Revolution motor home, built on a Freightliner chassis, does have a brake controller port under the dash but we do not have a quick-connect plug-in harness to connect it to a brake controller like the excellent Prodigy P3, part # 90195. You can still do a hard-wired install for your P3 by wiring the included pigtail harness to the wires leading to your under-dash port. It is a good idea to test those 4 wires, or confirm with your dealer what function each carries,...
    view full answer...

  • Sway Bar for 2015 Winnebago Itasca Ellipse Class A Motorhome Built on Freightliner Chassis
  • According to my research your 2015 Winnebago Itasca Ellipse Class A motorhome is built on a Freightliner M2 chassis. If your manual indicates this, and that this (impressive) motorhome has an 8K-rated front axle then we do offer a front anti-sway bar from Roadmaster. Part # RM-1209-116 is a kit that includes the sway bar, bushings, mounting brackets and hardware. The linked photo illustrates the kit components. The rear sway bar you referenced fits only Ford F-53-based motor homes.
    view full answer...

  • Do Glacier Chains # PWH2219SC Fit Tire Size 225/75R16
  • Yes, the Glacier Twist Link Tire Chains part # PWH2219SC that you referenced are a confirmed fit for the tire size 225/75-16 that you mentioned. For tensioners you'd then want the part # TCMA1.
    view full answer...