We do not show any confirmed hitch fits for a trailer hitch for the 2014 Cadillac ELR 2-door coupe.
I checked with Hidden Hitch, Draw-Tite and Curt - our three main hitch suppliers - and none offers hitches for your car. This has to do with the extensive fascia trimming that would be required.
But we can still help you with a bike rack. You'll simply use one of the confirmed fits for trunk-mount racks. The linked page shows you all 2-bike trunk racks confirmed to fit your ELR.
For an... view full answer...
The License Plate and Tail Light Relocation Kit # Y74VR is a very popular kit for many bike haulers. The kit is specifically designed to mount to the Yakima EXO System # Y82VR but it can also be used in other situations. You can choose to use the included mounting arms in either orientation if they will help you to bolt to your particular rack. They can also be bolted or attached directly to a cross bar on the back of the rack by using the mounting holes for the arms. The harness is plug... view full answer...
Yes, for your Tekonsha Prodigy P3 Brake Controller, # 90195, you can get the brake wiring harness separately.
For the 2017 Cadillac Escalade, the Tekonsha Plug-In Wiring Adapter, # 3016, will be the wiring harness you will need to connect your P3 to your vehicle's harness. view full answer...
If the trailer hitch on your vehicle is a Class II hitch, there is a rack specifically designed for use with a three wheel bike. Check out the Hollywood Sport Rider, part # HR1000Z-R-TRKADP. This rack will work with Delta or Tadpole style trike frames. view full answer...
If you have a 2006 Cadillac SRX then you can use Curt hitch # C13050 or Draw-Tite hitch # 75174.
If you have a 2006 Cadillac CTS or STS you can use Draw-Tite # 24767 or Curt # C11307 which are both Class I, 1-1/4 inch hitches.
If you have a 2006 Cadillac DTS you can use # 36287 or # C12058 which are both Class II, 1-1/4 inch hitches.
If you have a 2006 Cadillac Escalade or Escalade EXT you can use Class III hitch # C13422 or Class V hitch # C15324.
If you have a 2006 Cadillac XLR there... view full answer...
The wiring harnesses available for the 2013 Cadillac SRX come in two different styles. Models that came with a factory tow package do have a plug and play style connector such as # 118259 or # 56096. If you are unsure whether or not you have the tow package you can contact the dealer, give them the VIN of the vehicle and they should be able to tell you how it is equipped.
The other style is a hardwire harness such as # C59236. Plug and play harnesses are not always available for all vehicles.... view full answer...
We do offer one trailer hitch receiver for your 1998 Cadillac DeVille, part # 36267 from Draw-Tite. This is a 1-1/4-inch Class II hitch with 300-lb tongue weight and 3500-lb towing capacities.
You will want to check your DeVille's owner's manual or speak to a local Cadillac dealership to confirm that the vehicle is rated to tow a trailer. It is possible that the hitch and car have different capacities, and when this is the case the lower-rated item determines the overall capacity for the... view full answer...
To convert separate taillight circuit to combined circuits the part # RM-732 is the correct adapter to do this. If you wire the circuits of the right side of the box to your vehicle the circuits would be combined on the left side. view full answer...
We can help you with a trailer brake controller for your 2014 Cadillac ATS. And we do offer Draw-Tite brand controllers as well as many other popular brands like Tekonsha (parent company of Draw-Tite, by the way). All available controllers are displayed on the linked page.
From Draw-Tite we offer their proportional type controller # TK63VR and harness # 20127 which is what I recommend for you. This will install along with a 4-pole wiring harness # C56180 (unless you already have a 4-pole... view full answer...
I do have a solution for this, while currently no one makes a 1.25" hitch for your 2021 Cadillac XT5 we can offer a Reducer # C45770 with 4" extension or # HT02 with 3" of extension. They are 2 similar options with different lengths of extension.
I do recommend our Curt Hitch Receiver # C13285 as it is designed to hide behind the access panel on your Cadillac. The access panel is easily removed by 2-7mm screws. And install requires no drilling or removal of body parts besides the access... view full answer...
For this you will need the Curt Ball Mount # C45070, Curt Anti-Rattle Kit # C69HR and the Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball # C82KR.
The ball mount and anti-rattle kit are the same ones that are included with the Curt RockerBall Anti-Rattle Towing Kit # C43KR. view full answer...
Thule test fit the OutWay part # TH45JV on your 2013 Cadillac ATS and determined that it was a fit without causing any issues with any warning systems so it will work just fine for you.
What makes this rack far superior to the others is the attachment system. It uses only 2 retractable coated steel cables to attach to the vehicle rather than the 4-6 nylon straps like other racks. This makes installation quick and easy and the cables also last longer.
The cables store inside the rack so... view full answer...
While we do not have any custom fit luggage racks for your 1999 Cadillac DeVille you can consider the SeaSucker Monkey Bars Rack # 298-SX6000B. These mounts suction to the body work and have 48" crossbars. The parts have a capacity of 150lbs but be sure to check with your owners manual to determine any weight capacities your trunk is capable of supporting. view full answer...
You may be able to have a custom receiver made for your 2021 Cadillac CT4 using a Curt Weld-On 2" Receiver # E17. I do not see that any manufacturers are making a receiver that will fit your CT4 and the AT4 chassis is different so you will not be able to use one from that vehicle. A customization shop may be able to make you a receiver with the part above.
We also have a 1-1/4" Receiver Tube # E-911 if you want the smaller tube for better ground clearance. view full answer...
The BAKFlip F1 Hard Tonneau Cover # BAK72108 that you referenced is a confirmed fit for your 2002 Cadillac EXT Escalade and would easily fit without any modifications to the vehicle or the cover. view full answer...
Unfortunately we do not have the 82nd Airborne Logo hitch cover. We do have US Army covers like the emblem # AMG102391, but nothing at that is Airborne specific. I've attached our other Army covers for you to check out and a video of that logo hitch to assist. view full answer...
The WeatherTech 3rd Row Rear Floor Liner, # WT450665, is just the floor mat for under the 2nd row bucket seats and the floor area of the 3rd row seats on your 2009 Cadillac Escalade ESV it will not go behind the 3rd row seats.
The WeatherTech Cargo Liner, # WT41311, is for just the cargo area behind the 3rd row seats on the Escalade ESV.
The WeatherTech Cargo Liner, # WT41306, is a cargo liner for the Escalade (except the EXT and ESV) that will cover from the 2nd row back to the tailgate.... view full answer...
We do not have a Blue Ox brand available for the 2016 Cadillac SRX, I suggest the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord, # RM-152-98146-7. This is confirmed fit for your vehicle and we even have an installation video available being installed on the 2016 Cadillac SRX. Please note the linked video below. view full answer...
Go To Results