I do have a way that you could possibly transport your motorcycle with your 2015 Honda CR-V but unfortunately all of the motorcycle carriers are fits for 2" receivers so you will need to use a trailer to move your motorcycle around. It is worth noting as well that the online version of your owner's manual states that the vehicle is only rated to tow 1,500 lbs and that the tongue weight should never exceed 10% of that (which means you have 150 lbs of tongue weight). Even if your 1-1/4" receiver... view full answer...
For the Swagman Semi 4.0 2-Bike Platform Rack # S64698 we do offer the 2-Bike Add-On Kit # S64699 which expands this rack to a 4-bike capacity.
For the Swagman Quad 2+2 2-Bike and 4-Bike Platform Rack # S64FR that you referenced the 2-bike add-on is no longer offered. view full answer...
We don't currently have the Furrion 30 amp power inlet in black, but we do have it in Stainless Steel # F30ITSSS if you want the Furrion brand name.
If you want something closer to the # 431861 in style we have the Epicord 30 Amp Twist Lock Power Inlet - Black # 277-000138 or the Mighty Cord Replacement RV Power Inlet - 30 Amp Twist Lock - Black # A10-30INBKVP. view full answer...
We have a range of RV thermometers and weather station products shown on the linked page that provide temperature display and related information like humidity and forecasts but none of these is specifically intended for attachment to a window. For a cost-effective model that gives you both indoor and outdoor temps as well as a clock you might like the TempMinder Indoor and Outdoor Thermometer with Clock # MRI-122AG. view full answer...
For what you are looking for the NOCO Genius UltraSafe Battery Charger and Maintainer # 329-G750 that you referenced is your best choice. It does a great job keeping stored batteries topped off and is also not crazy expensive either. It's the perfect solution for your application.
I attached a review video for this charger for more info for you to check out as well. view full answer...
For your 2018 Ford F-150 with 6-1/2' bed you will want to use the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH21501 to use your Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT.
The Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH21501 are the rails used in the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-501 which is both the rails and rack. The # TH43002XT-501 is confirmed to fit the 6-1/2' bed. view full answer...
I have other solution options for you, but we do not have the style of adapter you are looking for and I am not sure it even exists. Your best option would either be a new hose or a propane Tee fitting.
The Quick Disconnect Propane Hose # 37207-31135 would connect to your quick connect on your camper and then the other end has a 1/4" Male NPT fitting. I am just speculating that is the opposite end of the hose you have. If you'd like to send in a picture or let me know what type of end... view full answer...
The Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo Carrier # CC-125, which fits the 23 x 60 Stromberg Carlson Cargo Carrier for 2" Hitches # CC-100, is only capable of fitting bikes that have tires up to 2-1/4" wide, and there isn't an adapter for fat tire bikes.
So in order to carry fat tire bikes you would have to use a dedicated bike rack. For a fat tire bike rack, we have the Curt 2 Bike Platform Rack for Fat Bikes # C18085-FB which is compatible with tires up to 4.88"... view full answer...
We have 2 different sets of roller bunks with a 3,000lb capacity from Dutton-Lainson.
First is the Deluxe Roller Bunk # DL21741 which is made of 12-gauge, galvanized steel and is 5' long per side. The 12 sets of 3 Rollers # DL203228 are removable if you wish to have them hot dipped galvanized when you receive them.
The second set is their Standard Roller Bunks # DL21755. These come powder coated and the rollers are as well removable. The powder coating would need to be removed properly... view full answer...
I'll start off by saying that the locks on the Curt Platform Bike racks like then # C18087 cannot be replaced, so the only way to be able to use the same key for all of the locks would be to replace all of the arms at the same time so they can be keyed alike. With that said, if you just want to replace the short arm you'll want to use the # C32WR and for the long arm you'll use the # C67HR. You'll need 2 of each for a 4 bike rack. view full answer...
We actually have an adapter finally that works to allow a Furrion Vision S observation system like the part # FOS43TASF or # FOS05TASF to work with the newer GM trucks like your 2021 GMC 3500 with the part # VGR64VR. This installs on the camera's power and ground wires to allow it to function.
The 7-way adapter # FR74FR that you mentioned does not work on the newer GM trucks. view full answer...
Your picture didn't make it through but I am familiar with this type of problem. Typically this is due the trailer not sitting level. But if the trailer is sitting level and the issue persists that indicates that you have either an equalizer that's too long, leaf springs that are too long, or the hanger locations are too close together. If you are sure the equalizer dimensions are exact same did any other components change during the install of the EZ Flex? view full answer...
We have the, # 37213055, this is an RV On/On - DPDT in black that is similar to the # 37212225 switch you identify but without the wide faceplate. view full answer...
After installing the Timbren Front Suspension Enhancement # TGMFK25D in your 2015 Chevrolet Silverado 3500 DRW 4WD Long Bed you will not need an alignment.
This is due to this suspension enhancement not requiring you to remove or modify any of your suspension components like control arms or tie rod ends, so your alignment will not change.
I included a video of the # TGMFK25D for you to take a look at. view full answer...
What I think you are saying is that you have the correct hose for connecting to your generator but you an adapter at the opposite end for mating the hose to a 100 lb. tank. I think what you are needing is the MB Sturgis Propane Adapter Fitting - Soft Nose POL x Type, # 204128-MBS. This lets you adapt a 100-lb propane cylinder fitting to a male Type 1 thread. view full answer...
Ouch!
The ball joint plate on your Thule Atlantis 1600 is not something that's available as a replacement part, so I'd try some epoxy/JBweld to re-attach it, or else you'll have to fabricate a way to keep the lid closed on that side.
While it wouldn't look the prettiest you could install a universal lock latch from a hardware store to the base and lid on that side to keep it from coming open if you can't get the ball joint fixed, or else you'd be looking at a complete replacement box... view full answer...
Yes, the Wheel Masters Tire Pressure Valve Extenders # WM8029135 can stay on your class C RV while you are driving. We do have the Wheel Masters Support Brackets # WM8029VS which will provide support to the rubber valve stems. This reduces the chances of leaks caused by the rubber cracking when pulled by the weight of the extender. view full answer...
The tabletops we currently carry come in the following sizes:
36L x 30W Inch
38L x 30W Inch
40L x 30W Inch
42L x 30W Inch
44L x 30W Inch
With what you're wanting the 36" x 30" would be the closest option. In this category we have three color options, which come with either like colored trim or black trim:
Cherry Wood Laminate
Maple Wood Laminate
White Wood Laminate
There are also options like # e76BR that come with two legs instead of just one. I've attached a link below to... view full answer...
We only have the C-Channel or "U-Channel" in the plain aluminum. We do not have it in black and unfortunately I am not sure where to direct you to find it in black.
- C-Channel for Enclosed Trailer # 362213-955 (Serrated)
- C-Channel for Enclosed Trailer # 362212-955 (Smooth)
We have the channel available in serrated and smooth plain aluminum. The only way to get black from us would be to paint the aluminum. view full answer...
The Camco Power Grip Cable with Lock # CAM44290 is not available to be keyed alike to another lock. By keyed alike they are referring to the two keys that come with the lock being able to unlock that one lock. If you were to buy 2 locks, there is no way that we can ensure that the keys from one lock would work on the other and more than likely they will not because there are a few different key numbers out there for these locks.
We do have the etrailer Cable Lock # e98891 which has the... view full answer...