Expert Answers about Chevrolet Trailer Wiring

• 4-Way Flat Wiring Harness and Submersible Tail Lights For a Boat Trailer Over 80" Wide
• The 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB you found is going to have the 3 wires which run down each side of the trailer. One wire on each side is going to be a ground wire(white), the 2nd wire(brown) is going to be for the running lights and side marker/clearance lights and the 3rd wire(green or yellow) is going to be for the turn signal/brake lights for each side of the trailer. The Optronics LED Combination Trailer Tail Lights # TLL160RK are submersible and the correct size needed...
  view full answer...


• 4-Way Connector Solution for Boat Trailer that Has 8 Wires
• Sounds like your boat trailer has two wires ran to each circuit on your current 4-way which isn't uncommon. Basically one wire is ran to each side of the trailer wiring so what you would need to do is run the matching circuits from both sides of the trailer wiring to the single wire of a 4-way like the part # 002402. This is a very common way to handle the setup you have now and it will work great.
  view full answer...


• Trailer Wiring For 2020 Lincoln Corsair
• There isn't a trailer wiring harness so you can take off your panels and plug in, you are going to have to hardwire a universal harness into your 2020 Lincoln Corsair. For that use the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236.
  view full answer...


• Wiring Diagram to Use for Wiring Up Tandem Trailer Brakes
• Hey Doug, so we don't have a trailer brake wiring kit but we do have the correct wire gauge for trailer brakes with the part # 10-1-1 which is sold by the foot and 10 gauge. I attached a picture that shows how tandem axle brakes get wire up for you to check out as well.
  view full answer...


• Is the Optronics 25 Ft 4-Way Trailer Wiring Harness Going to Last Long
• Thanks for reaching out Britt, replacing things frequently is really frustrating, especially if it's completely rewiring your trailer. The Optronics 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB has really great quality and will last you a long time - they also back this up with a 3-Year Warranty if that brings you any comfort. The Optronics wiring is made overseas but they produce a lot of different wiring and lights options for trailers and we hardly ever receive any bad feedback from them.
  view full answer...


• 2023 Volkswagen Jetta Trailer Wiring Harness Recommendation for Small Utility Trailer
• Thanks for reaching out, Erik! The T-One Vehicle Wiring Harness # 118791 will potentially work, but we've received feedback that the connectors don't always match up with the tail lights so I recommend using the Curt Universal Wiring Harness # C59236 instead. The Curt wiring will need to be spliced into your vehicle wiring so you will need to test and figure out what wires carry which functions. If this isn't something you're comfortable doing I've gone ahead and linked out installer...
  view full answer...


• Trailer Wiring Kit For 2022 Toyota GR86
• Hey Neil; thanks for the question and there is one generic/universal wiring harness you can use with your Toyota GR86, which is the following: - ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector # 119250KIT This harness uses clamp-on sensors so you don't even need to splice into its wires.
  view full answer...


• Recommended Trailer Wiring Harness For A 2024 Mazda CX-5
• Hi Richard, For a 2024 Mazda CX-5 you'll need the Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit # C59496. This wiring kit will splice into your tail light wiring and require you to run a power wire to the battery to prevent pulling power from the tail lights and dimming them.
  view full answer...


• Replacement Trailer Connector For A Boat Trailer And 2023 Toyota Sienna
• Hey Noah, Are you replacing the wiring on your vehicle or the wiring on the trailer? If you want to email me separately with some pictures of what you're trying to replace I'd be happy to help find the correct parts and walk you through the installation.
  view full answer...


• Trouble Setting Up Tandem Axle Horse Trailer Which Did Not Have a Breakaway System
• The Breakaway Switch # HM20060 also needs a Battery # HM20008 to get power from to activate the brakes. If you do not have a box to store and protect the battery you will also want that and a Charger # 20011 to connect everything together. I have linked our help article on trailer breakaway setup near the bottom of the page for you to reference to ensure you get everything wired correctly. Most importantly remember to wire for wire function and not color as not all trailer manufacturers...
  view full answer...


• What Gauge Wire is Used in the 3-Wire Pigtail for Peterson Trailer Lights item # 417-49?
• I sure can! The 3-Wire Pigtail for Peterson Trailer Lights item # 417-49 uses 20-gauge wire.
  view full answer...


• Troubleshooting A Non-Working Trailer Wire Harness On A 2012 Honda Pilot EX-L
• Hey Matt, If you're referring to the T-One Vehicle Wiring Harness for Factory Tow Package # 118558 then you shouldn't have any leftover fuses or relays. The relays need to be installed on the wire harness and the 30 amp FMX/JCASE fuse needs to be installed in the secondary engine compartment fuse box in fuse port 3 (trailer main). Without the fuses and relays installed the trailer connector will have no power. What wire harness did you purchase?
  view full answer...


• Will The Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter 20036 Plug into Vehicles Wiring Harness?
• The Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter # 20036 will plug into a 4-way flat vehicle side connector. If you do not already have one of these on your vehicle please let me know what vehicle you have and I can see if there is a kit to plug into your wiring harness or if you need to splice into the wiring. For the additional blue wire, that will need to be spliced into the reverse wire as there is not a connection on your vehicle. If you have a 7-way or there is a plug and play...
  view full answer...


• Will The Curt Flat Tow Harness Also Work With Tekonsha Tow Harness on a 2023 Jeep Wrangler JL?
• Yes, the Curt Custom Tail Light Wiring Kit # C96JR will also connect with the T-One Vehicle Wiring Harness # 118786 on your 2023 Jeep Wrangler JL. These all use the same style factory connectors so they will plug in line of each other. If you have any additional lighting connected to the trailer connector on your Wrangler you will need to ensure you connect the Curt harness to the factory harness and then the Tekonsha trailer wiring into it then the tail lights so they get the power needed...
  view full answer...


• Can Curt Trailer Wiring Harness # C59DR work with Trailer LED Taillights
• Hey Ray, yes the Curt trailer wiring harness part # C59DR does work with trailer LED taillights.
  view full answer...


• Parts Needed to Add 7-Way to 2024 Kia Telluride
• Hi George, We can get your 2024 Kia Telluride a 7-way, but I checked with our manufacturers and unfortunately there isn't a plug-in option like you were wanting. So you would need a couple parts to add a 7-way, with the first one depending on the model of your Telluride: - LX and S Models Without LED Taillights: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C93FV OR - All Other Models: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector...
  view full answer...


• Trailer Wiring Harness Fit For 2023 Hyundai Santa Fe Hybrid
• Hey Bob, we can get your 2023 Hyundai Santa Fe hybrid set up with a trailer wiring harness, and there are a couple options depending on if you need a 4-way or a 7-way. If you're using a brake controller you'll need the 7-way, otherwise if you just need the harness to activate the trailer's lighting and nothing else, you'll just need the 4-way. Here are your options: - 4-Way Connector: Curt T-Connector Vehicle Wiring Harness # CU94FR - 7-Way Connector: Curt T-Connector Vehicle Wiring Harness...
  view full answer...


• Parts Needed to Add 7-Way to 2018 Toyota RAV4 With 4-Way
• Hi Larrie, Really glad to hear you're happy with the products you bought! And we can for sure get you some details on what you need and how to wire the 7-way on your 2018 Toyota RAV4. Since you already have 4-way # 118578, all you need is the 7-way wiring kit and controller: - Universal Installation Kit for Trailer Brake Controller # ETBC7 - Tekonsha Prodigy P3 Trailer Brake Controller # 90195 The # ETBC7 has the 7-way and wiring needed for the install, and you'll plug the 4-way into...
  view full answer...


• Need To Convert 7 Round Semi Truck To A 7-Way Flat Connector
• Hello Robert. The best way to do this is to wire the semi truck with its own separate 7-way flat connector. For that you can use the Tekonsha # 119250KIT and the Universal Install Kit # ETBC7. This will include all of the components needed to wire the 7-way, including all of the necessary wires for an electric trailer brake controller. For a controller I recommend the Tekonsha Prodigy P3 #90195. The # ETBC7 kit comes with 25' of wire, for a semi you may need additional wire, and for that...
  view full answer...


• Question About a Product
• Good morning Vincent I hope you are well. We do have trailer hitch and wiring options for your 2019 BMW X5 50i with the M sport package. First lets look at the hitch. The only hitch available that is compatible with the M sport package is the Stealth Hitch Class 4 Hitch. The main advantage of a Stealth Hitch is that it features a removable receiver. This means that this hitch will be completely hidden when not in use. Stealth hitch offers the hitch complete with the towing kit and wiring...
  view full answer...