Hey Mike,
The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY48GR requires 5/8 x 1-1/2" grade 8 bolts and nuts that need to be torqued to 160ft/lbs. You'll want to use a minimum of 4 bolts per side. view full answer...
I have included the image below from the 1999 Ford towing guide which you will need to match with the cab and axle ratio for your truck to get the exact 5th wheel towing capacity. view full answer...
Good question Mel, and I don't blame you for being confused since there are a lot of options and there is probably more than one right answer. The correct pivot arm position will depend on the clearance between the nose of the camper and the cab of your truck. I have included some pictures below to help illustrate.
If your truck is a long bed, clearance should not be an issue, and you will want to use the one of the centermost positions. Basically, you want to keep the Kingpin centered... view full answer...
No, not at all! You will be all good with the extra capacity. Since you have a Lippert 1621 pin box and you're looking to get a Gen 3 goosebox you will want the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter item # RP85FR.
You will also need the Reese Safety Chain Kit with Clevis Hooks item # RP49151. These are not included with the goose box but are legally required. view full answer...
Hey Danny I would be happy to help you! Unless your 2015 Sandstorm 5th wheel trailer has a Lippert Rhino Pin Box which says Rhino Box on the side I am going to need to see the sticker on your pin box. It'll have some of the following or all; a serial number, RPO number, LCI number and some other information on capacity. If you could email me this directly I would be happy to find the right Gen-Y Gooseneck Pin Box for you.
Now, if you have a Rhino Box you'll need the Gen-Y Hitch 5th Wheel... view full answer...
No, they are not! The locking casters that are included with the Hollywood Racks Rack Valet Rolling Storage Cart for Hitch-Mounted Bike Racks item # HRRV-1 aren't going to work very well in grass. They're designed for hard surfaces. It will be pretty easy to swap them out for larger casters/wheels that will work in the grass.
I have linked the instructions below so you can take a look at how this rack is assembled. view full answer...
Gen-Y currently only shows their 5" Offset # GY43XR only fitting the 2017 and newer Ford Super Duty trucks. I have included a drawing with the dimensions for this below you can check and see if it will fit your 2012 Ford F-350. If not another option would be to use a Rail Adapter # C88KR with an Offset Ball # 16055.
Based on information I could find online I see the 2024 Brinkley Z3100 is going to come with a Lippert Rhino pin box. If this is what you have you will need the Gen-Y Hitch... view full answer...
Go To Results