Expert Answers about Dutchmen Custom Fit Vehicle Wiring

• Troubleshooting Curt 4-Way Vehicle Wiring Harness # 56008 No Left Turn Signal/Brake Light
• You are going to want to test the module on the Curt T-Connector Vehicle Wiring Harness # 56008 with a Test Light # PTW2993. The yellow wire coming out of the module is the wire which carries power for the left turn signal and left brake light. If you have nothing coming out of the module you will want to check for power going into the module. If you have power going into the module and not out then you know the module is the issue. Then you can reach out Curt or our customer service team...
  view full answer...


• Troubleshooting Loss Of Function With K-Source Custom Towing Mirrors
• Hey David, The K-Source Custom Flip Out Towing Mirrors # KS60195-96C are a confirmed fit for a 2020 Ram 1500 Classic so that leads me to believe that either the mirrors had a defect from the manufacturer or that there's and issue with the connection between the factory wiring and mirrors. Check to make sure there isn't some sort of debris or even a bent pin in the connectors. If you find nothing then try re connecting the wire harnesses and retest the functions. It could be as simple as...
  view full answer...


• Troubleshooting No Brake Lights With European Trailer Connector Adapter on 2002 Volvo V70 XC
• We haven't run into this in the past with customers who have used the # 118710 so I would start by checking the vehicle side connector. The brake and turn signals are separate on your European style 7-way so you will need to determine which pin is the brake signal and check for power using a tester like the # PTW2993. It may be that there is some corrosion on the connector as well, especially since it is a 2002, so it would be a good idea to check it and clean as necessary. If you don't...
  view full answer...


• 7-Way Extension for Hard to Reach Connector on Prodigy RF Installed Under 2022 Highlander By U-Haul
• A big part of your problem is that the Tekonsha Prodigy RF is designed to be mounted to your trailer. If they were going to use a wireless brake controller and mount it to your vehicle it should have been the Curt Echo # C51180 which simply plugs in-line with your vehicle 7-way. You can try to take it back and have them redo it but it probably isn't worth the trouble to try and get them to fix this. The # C86DR is a different kind of extension so it won't work with your setup. You can use...
  view full answer...