Hey Robert, thanks for reaching out!
You shouldn't have any issues fitting the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122 on your 1992 Ford F-150, but since we haven't performed this installation yet, I recommend checking out the linked video of this hitch on a 1988 F-250 so you can compare it to what you have.
We don't have insight into what the dual tank system looks like on your truck, and while it may not be necessary to remove your spare tire for the installation, it will... view full answer...
Great question, Adrian!
For your 2005 Ford E-350 set up as a passenger van bus you will need to have a heavy duty universal hitch installed like the Curt # C99CR. This type of hitch installs by welding so you'll need to have a shop or certified welder help you plan out the installation.
If you don't already have a shop you plan on working with we have an installer locator I'm linking to this page for you to reference and see who is in your area to help you with the isntallation. view full answer...
Based on images I could find it appears the factory Warn winch uses different mounting holes than the Draw-Tite Front Mount Trailer Hitch Receiver # 65076 on your 2024 Ford F-350 Super Duty. I have linked an installation video we did for this receiver near the bottom of the page which allows you to see the mounting location and ensure those points are still available on your truck. view full answer...
Hey Paul,
Yes, the Reese Dual Cam II Weight Distribution System w/Active Sway Control # RP75FR can be installed on an aluminum trailer. However, an Isolator shall be used to avoid Galvanic corrosion. Polypropylene tape or a heavy-duty Packaging tape maybe used as an Isolator. You'll also want to reach out to the trailer manufacturer and ensure that the frame is capable of handling the tension from a weight distribution hitch. view full answer...
Based on images I could find Steve, it appears the factory Warn winch uses different mounting holes than the Draw-Tite Front Mount Trailer Hitch Receiver # 65076 on your 2022 Ford F-350 Super Duty. I have linked an installation video we did for this receiver near the bottom of the page which allows you to see the mounting location and ensure those points are still available on your truck. view full answer...
Thanks for reaching out, Alan!
In order to install a Curt brake controller to your 2021 Chevy Silverado 1500 you'll need the Adapter # C51525, yes. This will connect under the dash to that larger gray connector you found.
If you don't already have the brake controller then I really like the Curt TriFlex NEXT Trailer Brake Controller # C24VV as it has a proportional operation so the trailer brakes match the time and intensity of your truck braking. view full answer...
Go To Results