I have the front and rear anti-sway bars that fit your 2016 Chevy Silverado 1500 listed below with their corresponding weights.
Front: 20 pounds
Hellwig Front Anti-Sway Bar - 1-1/2" Diameter Item # HE64GR
Rear: 34 pounds
Hellwig Adjustable Rear Anti-Sway Bar - 1-1/8" Diameter Item # HE43GR view full answer...
Hi Mike; the # HE86XR will fit your 2024 Sierra 3500 dually but it is designed for vehicles with a 2"-4" lift. If your truck is at stock ride height the correct anti-sway bar is the Hellwig Adjustable Rear Anti-Sway Bar # HE66XR. view full answer...
Matt, the Roadmaster Rear Anti-Sway Bar # RM-1139-117 you're looking at is not going to work with your 2002 Chevrolet Silverado 2500 HD. Instead, you're going to want to use the Roadmaster Rear Anti-Sway Bar # RM-1109-167. view full answer...
Hello Ronald, thanks for reaching out. Your Lexington Class C RV is on a 2013 Ford E-450 chassis, correct? If so, we do offer both front and rear sway bar options that will fit great. Here is what I recommend:
- Hellwig Rear Anti-Sway Bar - 1-1/2" Diameter # HE78RR
- Hellwig Front Anti-Sway Bar - 1-3/8" Diameter # HE26GR view full answer...
Yes, Alvie, the Roadmaster Rear Anti-Sway Bar # RM-1129-124 will work with your 2010 Dodge ram 2500 with air bags because it gets installed away from the air bags, so you shouldn't run into any issues. view full answer...
For your 2023 Ram 3500 single rear wheel we have the Hellwig rear sway bar part # HE64YR that is a confirmed fit which replaces the factory sway bar you have and reuses the factory end links. view full answer...
Hey Wiley,
For your 2023 Nexus Wraith 32W you'll need the Roadmaster Front Anti-Sway Bar # RM67MR and rear # RM77MR. I did reach out to Roadmaster about the compatibility with your LiquidSpring suspension but they haven't seen it yet so they're not quite sure if it would interfere with the mounting of the sway bar. If you take some pictures of the area round the rear differential and show how close the crossmember from the LS suspension sits to the differential they can gauge if it will... view full answer...
The B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate # BW44FR, and other options like it, don't come with a tab for an anti-sway bar but we do have the Curt Weld-On Sway Control Tab # C45822 which you can use to modify the B&W ball mount to fit your towing application.
B&W didn't add provisions like this so you'll want to make sure to think about how you'll use the ball mount prior to welding this tab on so you get it in the right place the first time. I recommend having... view full answer...
Hello Russ, we do have a rear sway bar for your 2020 Newmar Bay Star Sport 2813. I will tell you that the # RM-1139-149 that you were looking at is only for models with a 22,000 lb GVWR. Your 2813 model is the 20,500 GVWR model and for that you will need the following:
- Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter # RM-1139-145
I wanted to include an important note for the # RM-1139-145 sway bar. This will fit only if the shock mounts are parallel to the ground and have two holes.... view full answer...
Hey Kenneth, we have just what you are looking for with the rear sway bar part # RM-1139-147 and front sway bar part # RM-1139-176 that fits your 2021 Forester 3011DS Class C. This will make a huge improvement in ride quality, stability, and just overall driving. view full answer...
Yes, since the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232 is designed to work with 2" trailer hitches and the Roadmaster Anti-Rattle Hitch Extender for Tow Bars # RM-071-1075 is a 2" hitch accessory, the two will be compatible. view full answer...
Hey Thomas, the Hellwig sway bar part # HE66TR is a confirmed fit for your 2023 Ford F-150 Tremor and also is compatible with the air bag kit you have as well. view full answer...
Hey Travis, while the Roadmaster rear sway bar part # RM-1139-173 wasn't tested with aftermarket differential covers I can pretty confidently say it will fit since there is quite a bit of clearance between the bar the differential like you can see in the attached picture. view full answer...
Hey Chris, for your 2018 Ram 3500 dually we have the Roadmaster Rear Sway Bar part # RM-1129-144 that fits. The one you mentioned was not designed for the dually models. view full answer...
Hello Phil. It does sound like your 1,200 lb bars are too heavily rated for your trailer. I would be looking at something more like 600-800 lb range for your trailer. Something like the Reese Strait-Line Weight Distribution System # RP66073 would be ideal for this setup and it will allow you to re-use the shank from your old hitch. It will work well on trailers with a tongue weight between 400-800 lbs so you would see good results as far as sway control.
This system requires the lift... view full answer...
Hello Ronald. We do have sway bars that will fit your coach, but the Hellwig 7217 is for the Ford F-53 chassis and will not fit your vehicle. The Hellwig 7718 is what we recommend for your 2013 Ford E-450 Class C. Our part number for this is # HE26GR. view full answer...
The Sway Control Plate # GY33YR will fit on Glyder # 325-GH-12001, discontinued Rebel and the current Phantom # GY49VR ball mounts. This will allow you to use it with a Sway Control # 83660. The plate is specially designed to fit the notches in the Gen-Y products which are not found with other brands. If you can tell me what ball mount you have I can let you know if there are any kits which will fit your ball mount and allow for a sway bar. view full answer...
Hello David. I double checked with Hellwig and they confirmed that the Hellwig 7772 Sway bar part # HE54FR will indeed fit the 2023 and 2024 Sprinter 2500 with AWD. view full answer...
Hi Ken, thanks for the question; I checked with our manufacturers and found there is indeed one trunk mounted bike rack that fits the 2023 Chrysler Pacifica, from Yakima. It is the FullBack and comes in a 2-bike or 3-bike version:
- Yakima FullBack 2-Bike Rack # Y02634
- Yakima FullBack 3-Bike Rack # Y02633
The FullBack is a very nice rack, with strong anti-sway cradles and ratcheting straps that secure your bikes at three different points. This is important because it ensures your bikes... view full answer...
Hello Justin, thanks for reaching out. We do have the Zip Strips # Y55XR which will fit your Yakima Ridgeback bike rack. The wedge piece is not available by itself though, so the only way to get one is to get the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks # 8880508.
With the rack that uses a 1-1/4" to 2" adapter, there is really no other anti-rattle device that can be used with this setup. Tightening the SpeedKnob will be the best way to reduce play. view full answer...