I am sorry Mike but they do not. The HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks item # HJ54FR you referenced are not compatible with Atwood electric jacks.
Additionally, there isn't a similar extension for Atwood jacks because they have been discontinued. The Swing-Out Extender item # HJ54FR is only compatible with electric camper jacks from Happijac, like the 8,800 lb HappiJac Electric Truck Camper Jack System - 34-1/2" Lift item # LC736514-ELKIT the... view full answer...
I do see what you mean Mike. The Reico Titan components are not something we currently offer but we have similar jacks like the Brophy # CX74 which fit under the camper. And like Reico Titan we have the Electric Jacks # LC736515-ELKIT which are designed to mount in the vertical setup. I am not aware of any adapter for either manufacturer which will allow you to attach the jacks in the manner you are wanting. view full answer...
Hello, thanks for reaching out!
The Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems # LC182496 will fit all HappiJac systems so it will work just fine with your 3000 model. view full answer...
Hey Dave, thanks for reaching out!
For your application I recommend checking out either the Replacement HappiJac # LC736514 with a 34-1/2" Lift, or the Replacement HappiJac # LC736515 with a 36-1/2" Lift.
I wasn't able to find anything to cross-reference with your 4300 series system but these are both manual jacks that are operated with the 6-Sided Manual Crank # LC1824362. view full answer...
Hey John, yeah the Lippert Ground Control TT part # LC672136 would fit and work great on your StarCraft 212fb. This will give you a really easy way to both level and stabilize your camper and this would for sure be your best option. view full answer...
Hi Joseph,
The Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 is a mostly universal fit that just requires jacks with up to 2-1/4" outer tube diameter that are shorter than 22-1/2" so that the base can clear the jack. I would just measure your step to confirm but there's a high probably that you'll be able to use the Jack-It 2 Bike Rack. The design of the wheel cradles would allow for 26" mountain bike tires without the need for an adapter. view full answer...
Hey Tyler, so the difference is the amount of motors that each has. The Lippert PSX2 has two and the Lippert PSX1 like the part # LC298707 has a single motor. The foot print and mounting etc. is exact same so this will fit and work great in place of what you have. view full answer...
Hey Robert, thanks for reaching out!
When you hooked up the motor for your Rear Right Leg # LC344792 did you by chance check any fuses tied to that motor as well? Check that all of your connections are good and check that any fuses have been replaced.
When you say the motor and leg aren't attached at this time do you mean they aren't attached to each other, or that they aren't attached to the trailer? view full answer...