The Phoenix USA QuickTrim Hub Cover for Trailer Wheel # QT545C will fit as long as you have a 5 on 4-1/2 bolt pattern with 1/2" lug nuts. I wasn't able to find any good pictures which show your wheels so you will need to double check your bolt pattern to be sure it matches what is on your trailer. view full answer...
Hi Robert,
So we do have one option for baby moon hub caps for a 15 inch, 5 lug trailer wheel, the Americana Baby Moon Trailer Wheel Center Cap # AM90086.
That said, these will only fit a conventional trailer wheel, for example the Dexstar Conventional Steel Wheel # AM20504. A conventional trailer wheel has a center rim, and I have added a photo of the aforementioned wheel for you to take a look at. If you have the same wheel with that protruded section in the middle, the # AM90086 will work. view full answer...
Great question, Frank!
The B&W Patriot 5th Wheel Trailer Hitch w/ Slider # BWRVK3270 has a height range of 17" - 19" so just add that to the height of your base rail kit on your 2017 Ford F-250 and you'll be able to see for certain if it will fit with your tonneau cover.
The B&W hitches typically fit just fine under tonneau covers but it's always best to double check the math. view full answer...
There is no difference between the front and rear covers that come with the # WM3165B0. Each one is the same as the # NA7165B1 which fits the front or the rear. view full answer...
The Wheel Masters Lug Nut Covers # WM8019 will fit as long as you have 7/8" lug nuts. You will need to confirm your lug nut size with a socket to verify this. view full answer...
Since you have an 09 Silverado I imagine the rail kit you have is the Reese 30061 which looks like the picture below. The Replacement Puck Plug Covers for Elite and Signature Series Fifth Wheel Rails # 58199 are designed to fit the pucks on this rail system. If you have something else, please feel free to email me a picture and I will see if I can help. view full answer...
Yes, it is! I took a look at the Roll-N-Lock M-Series XT cover that fits your 2021 Chevy Colorado. Since it has the integrated T-Slot rails you can install the Rhino-Rack Vortex Crossbars item # RRVA165B-RRRLT600 you were looking at. These have a 220 lbs capacity.
For a bike rack you can use the Rhino-Rack Hybrid Roof Bike Rack item # RRRBC050. This is a wheel mounted bike rack that has a 45 lbs capacity. It fits bikes with 20" - 29" wheels and is our highest capacity bike rack that mounts... view full answer...
Hi Geneva,
For a 30" x 10" Jeep tire I recommend the Bestop Large Tire Cover, 30" x 10" - Black Diamond # B6103035. This cover has a tight elastic band for a very snug fit so it might be a bit of a pain getting it on but you won't have to worry about it blowing off when you're on the highway. The inside of the cover is made of a cotton-backed fabric that's mold/mildew resistant to prevent scratches to the wheel. I've attached a short video below where Evangeline will show you this cover... view full answer...
Hi Eric,
The Pace Edwards Bedlocker Retractable Hard Tonneau Cover # PE62CV unfortunately would not be a fit for dual rear wheels but Pace Edwards does still have a few options that are confirmed to fit:
-Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black # PE54UV
-Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover - Aluminum - Matte Black # PE82CV
The only real difference between the two is that the # PE54UV has an aluminum and... view full answer...