Hey Ken, we have verified in the pas that the Camco RV fridge vent cover part # CAM42163 works with the Atwood fridges like what you have and is black in color.
The Lippert steps part # LC432690 that you referenced would also work great as a replacement step setup as well. This matches the dimensions you need and would work great. view full answer...
You will need a minimum of 10 inches of clear space inside your trailer for the double step Lippert SolidStep RV Steps for 25" - 28-7/8" Wide Doorways # LC733931.
Then for the threshold/lip that can be up to an inch for the install of the steps. view full answer...
For the fold up RV steps they will typically have you measure the door but on a lot of them they are referring to the rough in size of the door. So for a door like yours which has a 29-3/8" measurement of flange to flange it is going to be a 30" door rough in. A lot of the time the door frame size is listed on the tag for the hinged side of the door and this is a method to find your door size. This is why you will see both dimensions listed for the steps as not all doors are going to have... view full answer...
Hey Rick,
Yep, the 3-step MORryde StepAbove RV Steps # MR68RR will indeed work for your Keystone Montana. These steps are designed for 30" to 33-1/2" ground to threshold measurements and doorways that are are 27-3/4" to 30-1/4" wide.
Since you have a 30" height and 28-1/4" wide doorway you can definitely use the # MR68RR. view full answer...
Hi Frank,
The TorkLift A9004 can be purchased with part # TLA9004. These steps are designed to fit a 28" doorway width (B) and 27-3/8" to 34-7/8" entry height (A). If you find your measurements differ then let me know and we can find the correct replacement. view full answer...
Hey Brad, thanks a bunch for going ahead and getting all those measurements in advance. Based on the measurements you've given, the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step # TL52SR will work perfect for your coach.
These steps are going to be an awesome upgrade from your OEM steps on your 2024 Heartland Eddie Bauer, has a nice 325 lb capacity, and glows in the dark for up to 10 hours with only 5 minutes of light exposure (neat!).
If you need anything else, don't hesitate... view full answer...
Yes, unfortunately those measurements are critical with the most critical being the gap at the bottom of the door. Since it is less than the 3/8" and your threshold is less than 5/8" this tells me the door will not be able to close with the steps folded down. The panel which the Steps # MR68RR attach with would catch on the bottom of the door as you try and close it. Because of this you should consider the MORryde Quick Connect RV Steps # MR32JR which can attach just below the door. This... view full answer...
Hey Jim! We've had this box out recently and have taken some measurements. I can confirm that the outside length of the MORryde Locking RV Storage Box item # MR43RR is 25-3/4" without the brackets attached. view full answer...
Based on your measurements the # MR78RR would be the correct option from MORryde. We also have the strut assist version available which is # MR65RR. The doors may not close properly if the threshold is outside of the 5/8" - 3/4" range so you might need to add some extra material to the threshold to use either of these.
We do have steps with an 8" rise that will fit your doorway width of 28" and entry height of 34". The Lippert SolidStep RV Steps # LC791572. The steps aren't quite as wide... view full answer...
The internal tray dimensions of the 22-3/4" x 16-1/2" MORryde RV Generator Slide Out Tray # MR49RR are 21" long x 14" wide x 2-3/4" tall which according to my research means it will accommodate up to 2 golf cart batteries.
The MORryde RV Fridge Tray # MR39RR is the next step up with internal dimensions being 24-13/16" long x 14" wide x 2-1/2" tall which should be able to handle 3 batteries (provided they don't exceed the 225 lb weight limit), but it doesn't look like any or our trays will... view full answer...
Thanks for the info and photos, Joe!
From what I'm seeing in your photos it looks like the Mini-Illuminated 12V Switch # 37212765 could be a great option for you.
The switch measures 1-1/4" tall x 3/4" wide x 3/8" deep and fits a cutout of 3/4" tall x 1/2" wide. If this matches what you have then you'll be good to go! Otherwise Let me know what the dimensions of are your switches you need to replace and let me know what you have so I can compare that with our selection. view full answer...
Go To Results