I sure do! 7,000 lbs trailer axles use a grease/dust cap with a 2.72" inner diameter, which means you would need item # K7CAP to access the zerk fittings on the spindle.
To replace bearings on 7,000 lbs axles you'll need the Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal item # BK3-210. These are sold individually you'll need one per hub. view full answer...
Hello 89 5,
We do have a 3,500 lb axle with 89 inch hub face to hub face and 74 inch spring center to spring center that will work with a hub that has a 5 on 5" bolt pattern, but the hub just needs to be purchased separately as they don't come in a single package. You can choose from either a hub and drum or idler hub and here's what you'll need:
- Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs # T3584F-EZ-8974
- Easy Grease Trailer Hub and Drum Assembly # AKHD-550-35-EZ-K
OR
-... view full answer...
We have either the Standard Hub # 8-258-50UC1 or the EZ Lube Hub # 8-258-50UC1-EZ which will fit your spindle and have the ability to move to the larger 13" wheel size. These both have the galvanized finish and include new bearings, seal and lug nuts. You will need to get 2 of whichever hub style you need as the hubs are sold individually. view full answer...
Hey Dan, the Dexter 3,000 lb hubs use inner bearing # LM67048, outer bearing # L44649, and double lip grease seal # 58846. We don't have all of these together in a kit but you can order them individually and you'd be set. view full answer...