Hey Jim.
To protect your boat trailer from theft you just need to get a coupler lock. These come in a variety of shapes, sizes, and colors and can be purchased separately or in a kit together like with the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set # 3794DAT. This will come with a lock to cover the coupler, a lock for the coupler latch, and two different hitch pin locks for your trailer hitch ball mount so no one walks off with that while you're vehicle is in the marina... view full answer...
Hey Steve,
We currently offer the CE Smith Bow Roller Bracket # CE31005PG, which bolts onto a 3-1/2" wide winch stand and would allow you to mount a Boat Trailer Rubber Y-Stop # DL21732. view full answer...
Thanks for reaching out, Steve!
The Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E # AM10140 style is offered on some wheels with a 5 on 4-1/2" bolt pattern, but it's using the Load Range D version instead:
- With White Wheel # AM31199DX
- With Black Wheel # AM35354
- With Galvanized Wheel # AM31202
If you need the higher Load Range E rating then you'll need to purchase the tire and wheel separately and have a shop mount the tires for you. For this application... view full answer...
Hey Vivien, so we don't have just the T09 machined wheel that the Kenda Wheel and Tire part # AM34659 has separately at this time. Best solution from us would be to get the wheel and tire combo and basically have a brand new tire as well. view full answer...
We have either the Standard Hub # 8-258-50UC1 or the EZ Lube Hub # 8-258-50UC1-EZ which will fit your spindle and have the ability to move to the larger 13" wheel size. These both have the galvanized finish and include new bearings, seal and lug nuts. You will need to get 2 of whichever hub style you need as the hubs are sold individually. view full answer...
Sorry Gary, the Furrion Vision S Wireless RV Backup Camera System # FOS05TASF currently offers no way to pair with the screen on your 2018 Chevrolet Silverado 3500 LTZ. I believe the only cameras which will work with your screen are only available from Chevrolet and require a hard line to be ran from the back of your trailer to your cab. view full answer...
Thanks for the picture and your patience! I just heard back from Dexter and your D20 axle uses the same inner and outer bearing of 1.063" which is item # L44649. I recommend the Trailer Idler Hub Assembly for 2K Axles item # AKIHUB-545-2-LF-2K or item # AKIHUB-545-2-LFEZ-2K if you have an EZ lube axle. Both of these idler hubs are sold individually and have a 5 on 4-1/2 lug pattern. view full answer...