Expert Answers about GMC Topkick

• How to Test Trailer Connector Functions on a 1996 GMC Topkick
• I may have a solution for you but unfortunately we do not have any wiring diagrams for a 1996 GMC Topkick. If you are trying to figure out how the 7-Way at the rear should be wired we do have a picture which shows what the typical layout is (see attached photo on the right side) but it isn't a hard and fast rule that it has to wired that way. The best way to make sure that the 7-Way is wired how you want it is to simply use a circuit tester # PTW2992 and test the functions of the various...
  view full answer...


• Can a Brake Controller Fry an Electric Over Hydraulic Actuator
• No, there isn't really a chance that the stock GM brake controller fried the HydraStar Electric Over Hydraulic Actuator part # HBA16 as it could not provide nearly enough voltage to do so. If you have checked the wiring then the issue is most likely inside the actuator. There has been problems in the past with the actuator getting too hot and frying the circuit board which is why they developed the vented model. The HydraStar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes...
  view full answer...