bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Kenworth T800


  • Mounting Hole Dimensions of Buyers Products 45 Ton Pintle Hook
  • The Buyers Products 45 Ton Pintle Hook # 337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2 inches on center. I've attached a photo to help. I recommend the mounting kit # 3378530 with this hitch. We don't have anything that will fit that 4 inch square bolt pattern. I've attached a link to all our options from all our manufacturers...
    view full answer...

  • Troubleshooting Powered Converter Box Where Trailer Brake Lights Are Always On
  • It's possible that the converter box on your Curt # C56190 has gone bad, but typically something like this is caused by a short in the system that would need to be fixed to avoid the issue again. From what it sounds like, I believe this can be isolated to the tow vehicle and I recommend that you begin by checking the wiring for any damage that might be visible. I also recommend checking the trailer plugs and cleaning them off so that they're free of dirt, debris and corrosion. If you can...
    view full answer...

  • Timbren Front Suspension Enhancement for 2011 Kenworth T800
  • The Timbren Front Suspension Enhancement System # TKWF001 will not increase the weight rating of your front axle. It will simply help add stability and shock absorption. This system is rated for 10,0000 lb capacity and designed for trucks equipped with the 8 bag Airglide AG1000 suspension system. If this is the system you have it will work well for you. If the numbers you gave are accurate, there is not a system designed to work with your truck from any of our manufacturers.
    view full answer...

  • Parts Needed To Pull A Gooseneck Trailer Behind a 2007 Kenworth T800
  • I do see your Holland FW35 is designed to fit a 2" kingpin like the one used on both the 25K # KPG5-R25-IP and 30K # KPG5-R30IP coupler adapters you looked at. For the wiring you will need to create a custom adapter. First you will need the 7-Pole Round Pin Connector # PK11702. This will need to be wired to the Tail Light Converter # HM48847 since the 7-pin connector on your Kenworth has separate wiring for the brake and turn signals and a 7-way Blade # PK12-707E combines the brake and...
    view full answer...