For the Thule EasyFold XT Bike Rack, # TH903202 we have the Extra-Long Loading Ramp for Thule EasyFold XT, # TH933402. This ramp attaches to grooves on end of each ramp tray, no need to modify. view full answer...
Sounds like you are looking for the Vinyl Cap for SMI Air Force One Supplemental Braking System # SM99608 as this is the correct cap for the air valve connection point on the vehicle side of a part # SM99243. view full answer...
We have great recumbent bike rack options like the Hollywood Racks Sport Rider for Recumbents part # HR1000Z-R which once you install a hitch on your 2018 Kia Sorento you'd be totally set. The recumbent bike racks have the ability to handle the extra weight and longer wheelbase of the recumbents as well as the smaller wheel diameters.
Then for a trailer hitch the Draw Tite part # 75908 would be an excellent option that installs relatively easy and has plenty of weight capacity. I attached... view full answer...
We do not sell just the mounting hardware for an adjustable coupler such as the Sleeve-Lock # CTA-196 you were looking at.
That said, the hardware is just grade 8 bolts that are at least 3-1/2" long, and you can pick them up from a local hardware store. view full answer...
The etrailer # e98841 hardware can be replaced using part # RHK and putting the part number from the hitch (e98841) in the field for "Hitch Item Number". I've also listed the parts below and linked a copy of the instructions for you to check out.
-Qty-4, 1/2-13 x 4 1/2 CARRIAGE BOLT
-Qty-4, HFN 1213, Grade 8 HEX FLANGE NUT
-Qty-4, M10 - 1.25 x 25 HEX BOLT
-Qty-4, 3/8" CONICAL TOOTHED WASHER
-Qty-1, 13152-SP .188" SPACER PLATE view full answer...
We do have replacement end caps for your Thule AeroBlade Edge Roof Rack TH7602-TH7602!
The Replacement Endcap - Left is # TH1500052333 while the Replacement Endcap - Right is # TH1500052334.
If you take a look at the accompanying photos you will be able to tell which replacement you need. I also highly recommend using the Thule One-Key System Lock Cylinders # TH450400 to lock the rack into place; if you do not have cylinders then you will need the Replacement Locking Plug for Thule Aeroblade... view full answer...
The best way to find a brake line that will work for your trailer is to take a quick measurement. You will want to measure from the actuator at the front of your trailer back to the Tee for the brake lines running to the brakes. From my research I saw that the Larson 233 boats were all on tandem trailers.
I have attached a link to the brake lines product page we offer. You can select a line that best matches the length of the line you are wanting to replace or you can go with an easier... view full answer...
Thanks for all of the info on your current hubs! That makes picking out new ones very easy. The etrailer hub part # AKIHUB-545-35-G-EZ-K that you referenced is a confirmed fit and would work great. It's also galvanized which helps prevent corrosion. I attached a review video and install video for this hub for you to check out as well. view full answer...
We don't have specific hub info for the trailer that came with your 2000 Yamaha Wave Runner, but we can help you pick out the correct replace hub.
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you... view full answer...
To obtain replacement keys, you will need to look at the lock cylinder - there should be a number engraved into the face of the lock cylinder, as shown in the photo I've provided. That is the key number you will need to order the correct key.
Most likely the number will start with the letter N and then have three numbers that follow it. For example if the cylinder had N152 on it you would want Replacement SportRack Key # THKEYN152.
Once you have the number you will want to search our... view full answer...
The Replacement Upright Ratcheting Bar # P321 that you mentioned is made to fit the Swagman XTC bike rack # S64670, and the Swagman XC2 bike rack # S64650.
I was not able to find or reference the part number SR-640G-03 you provided as it did not appear in Swagman's catalogue or ours. view full answer...
The replacement foam pieces that I recommend for your Pro Series PS63138 hooks are the Hollywood Racks # HRSPR-FP.
I went out to our demonstration bay and measured these replacement pads and found that they will work great for your rack. The # HRSPR-FP will be the same inner and outer diameter and actually a little bit longer in length (which can be trimmed to fit) than the original pads on the Pro Series bike rack. The foam pad is sold in a quantity of 1, so if you want a few extra... view full answer...
On the Camco Automatic Changeover 2-Stage Propane Regulator # CAM59005 the fittings are a 1/4-inch inverted flare on the inlet and a 3/8-inch NPT female on the outlet. Part # CAM59953 is a correct replacement. view full answer...
If you are only needing the awning fabric we have the Replacement Fabric # LCV000334408 you are able to use on your Dometic Awning. This will be a similar brown on the end when unrolled which fades to white when rolled up as your current awning.
In the event you need an entire new awning the 17' Wide Roller w/ Fabric # LCV000223190 and Arms # LC759405 will be what you need. view full answer...
From what I was able to find out with my research is that the ST-36-RH that you've got is the same light as our Optronics LED Tail Light # STL36RB; the replacement lens for the STL36RB can be found using part # A39RB.
With that said, Optronics does make changes to their lights from time to time so I've provided a diagram that shows the dimensions of the current STL36RB that you'll want to make sure your current light conforms to. They should be fairly similar, but the important dimensions... view full answer...
Go To Results