According to the installation instructions, linked below, for the Curt Trailer Hitch, # C11446, and your 2008 Suzuki SX4 Sport, you will need to fishwire bolts through the frame by enlarging an existing frame hole and using a bolt leader (included) to route a bolt and block through the attachment point at each frame rail.
The process is actually not very difficult. I have included a video below showing the fishwire technique that should help when installing the trailer hitch.
The recommended... view full answer...
The reason the installation instructions for this Curt T-Connector Vehicle Wiring Harness, part # 56002, show a Grand Vitaro is because the SX4 hatchback and the Grand Vitara have a very similar construction to the point that having separate instructions would be redundant, especially since both of these vehicles share the same wiring solution.
If you take your time and follow the instructions carefully you should have no problem installing this product or a hitch onto your 2011 Suzuki... view full answer...
Transmission coolers are universal fit items. As long as you have space in front of your radiator to accommodate this cooler then it will fit. The dimensions of the cooler are 11 inches wide, 7-1/4 inches tall and 7/8 thick.
A person with average mechanical ability should be able to install a transmission cooler with little difficulty. It may be necessary to use a jack and jack stands to gain access underneath the car and as always, use proper safety practices when jacking and working... view full answer...
All of the flat towing braking systems that work with your 2011 Suzuki SX4 are shown on the linked page. For the SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 the installation instructions are linked for you. I also linked an installation video (showing a different car) that will let you see the whole process. view full answer...
The Roadmaster # 521019-1 Base Plate Kit for your 2012 Suzuki SX4 is indeed secured to the front side of the frame rails.
Just like most of the Roadmaster Base Plates, the front bumper cover will need to be removed from the vehicle in order to access the front of the frame members so the base plate mounting brackets can be installed.
Before attempting to flat tow the vehicle, I would urge you to consult the owners manual and Suzuki regarding procedures for safely flat towing the vehicle.... view full answer...
Yes, you would need to drill or cut with a holesaw a 1 inch diameter hole in each frame rail so that the bolts can be pulled into the frame. I have added a link below to the instructions that come with the hitch so you can review the steps and what needs to be done and decide if it is something you are comfortable with doing. view full answer...
Go To Results