Expert Answers about Kia Rondo

• Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
• Based on your manual indicating 7" brakes it is probably a 2,000 lb axle. That should be a 4-bolt brake flange on the axle as well. Try checking your axle tag to see if you can verify this. The capacity may be listed, or it can be found with the serial number. You will need the following parts to add brakes: -Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2 # 8-257-5UC3 -Dexter Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - - 2,000- to 2,200-lbs...
  view full answer...


• Hidden Hitch Pilot Brake Controller # 80550 Installation in 2012 Kia Rondo
• To install a brake controller in your 2012 Kia Rondo you will need a Brake Controller Install Kit # ETBC7. The Hidden Hitch Pilot Brake Controller # 80550 will wire into the vehicle using this kit. Your Rondo needs to have a working 4-pole flat trailer connector in place; if it does not already have one you can use # 118431 from TowReady, which is a simple plug-and-play installation. This harness connects at your taillight assemblies. I have linked the written installation instructions...
  view full answer...