If you don't have a roof on your Polaris Ranger I suggest using the Malone Rack Pads # MPG314 to wrap around your roll cage. Then get the load extender # Y01149 to hold up the rear of the kayak. IF you do have a roof I suggest getting something like these saddle style carrier # RR581 and drill a hole in your roof and put the T-Slot through the hole and tighten it down. view full answer...
I got the same information you did from UWS. The correct box is the UWS UTV Toolbox - Crossover Style - 3.2 cu ft - Matte Black, part # UWS83225, and the mounting kit is Custom Mounting Hardware for UWS UTV Toolbox, part # UWS08233.
I have included product description links below. view full answer...
I've checked with my Bulldog representative, and have been told that the # BD15174 is indeed the correct winch mount for your 2015 Polaris Sportsman 570. My representative went on to tell me that the mount is compatible with the Superwinch Terra 35. view full answer...
There are universal hardwire options for a 4-flat wiring harness that connects to your tail lights. I'm not sure if you were asking for the vehicle side or trailer side so I'll go ahead and give options for both:
- Vehicle Side: Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C58044
- Trailer Side: Wesbar 4-Pole Flat Connector - 4' Long # W787264 or 8' Long # W787268 view full answer...
The Classic Accessories ATV-UTV Seat Cover Set for the Polaris Ranger that you referenced, part # 052963783773, is a confirmed fit for your 2013 Polaris Ranger 500 as long as it is not the XP or HD model. This washable black fabric/pvc cover set includes two seat covers and two headrest covers. view full answer...
Yes, the Curt hitch part # C13079 is a confirmed fit for your 2019 Mitsubishi Outlander Sport and would work well as it's a 2 inch hitch with plenty of towing capacity.
If you have LED taillights the trailer wiring kit you need is the part # 118538.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch... view full answer...
The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7322 is a confirmed fit for your 2019 Honda HR-V and would be our recommendation for a bike rack as unlike the Curt it does not require the stabilizer strap when carrying a non-supported load like a bike rack.
For a bike rack I really like the Hollywood Racks Destination Bike Rack # HLY94FR.
This is a platform bike rack that only weighs 20 lbs. The biggest drawback to platform bike racks has always been the weight of... view full answer...
I reached out to my tech contact at Go Power and he said you won't need an additional inverter or transfer switch based on your current system. Having 6000 Watts already available won't require you to have an additional transfer switch or inverter.
The Go Power Solar Extreme Charging System - 510 Watts # 34282185 has the inverter included which you don't need. My recommendation is the Go Power Solar Flex Kit w/ Digital Controller - 550 Watts - 28.4 Amp # 34275012. This kit will give... view full answer...
For your 2014 Polaris Ranger Crew the correct custom mount for installing the Superwinch part # SW1145220 is the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15174. view full answer...
This is a really good question. So when a vehicle is being flat towed on the highway you'll notice that the vehicle tracks from side to side when as the steering corrects itself and then over corrects itself. It almost looks like someone is in the vehicle and just ever so slightly turning from left to right. This then ends up putting extra strain on a bike rack that is installed in the hitch as that creates additional stress that's not normally on the rack.
So the Kuat Piston Pro part... view full answer...
As long as your 2014 Polaris Ranger 400 is not the XP or HD version you can use Classic Accessories' # 052963783773. This black seat cover set features heavy-duty U.V. resistant ProtekX Extreme fabric with PVC backing and includes seat covers and headrest covers. All are machine-washable. view full answer...
The circuit breaker on the Bulldog Powered Jack kit part # BD1824200100 will trip if over 25 amps is drawn. Depending on the load it would draw around 24 amps at max. view full answer...
For your 2018 Polaris 570 Sportsman the winch mount you want is the Bulldog part # BDW15165. This will work with your Terra winch as well. view full answer...
Yes, I checked with Classic Accessories and seat cover # 052963783773 will fit your 2006 Polaris Ranger 500. It is designed to fit 2002 to 2008 Rangers. view full answer...
We do have an adapter for the Gen-Y adjustable ball mounts that allows it to be used with sway control with the part # 325-GH-300-1. view full answer...
I would recommend a larger lift and as long of a ramp as you can. Since your Polaris Slingshot SL is 150 ish inches long so these ramps # RR-TR-11-2 are your best option! These ramps are 136-7/8 inches long and have the highest lift so you don't have to worry about you bottoming out. It seems like your Aluma 8218 doesn't sit too high so the 11" lift will get you right up there. You can put the ramps under the trailer and tilt it back a little bit since there is a little lip for your trailer... view full answer...
To mount a Superwinch brand winch to your 2014 Polaris Ranger, you will want to use the Bulldog ATV Winch Mount part # BDW15165.
For a 3,000 pound winch you will want to use the LT3000 # SW1130220, Terra 3500 # SW1135220, or Terra 3500 SR # SW1135230.
This mounting kit is also designed to work with several other Superwinch LT and Terra winches: the LT2000 # 1120210, the Terra 2500 # SW1125220, and the Terra 2500 SR # SW1125230. view full answer...
I spoke to Superwinch and they informed me that the correct winch plate you would need for your 2014 Polaris Ranger 900 Crew is the part # 2202919. view full answer...