The Draw Tite hitch part # 24628 that you referenced does not come with a ball mount. That would have needed to have been ordered separately.
The recommended ball mount is the Sportframe Ball Mount part # 3592, for a 2 inch ball part # 19258, for a 1-7/8 inch ball part # 19256.
For trailer wiring you would want the Draw Tite Wiring kit part # 18252. See install video. view full answer...
The recommended ball mount to use on a 1997 Chevrolet Lumina with the Draw-Tite Trailer Hitch 24628 (DISCONGTINUED) is the Draw-Tite Ball Mount, part # 3592.
The ball mount that you referenced, part # 3594 has too much of a rise and is not recommended by Draw-Tite to be used on the Chevrolet Lumina. With Class I and II hitches, the ball mount recommended by the hitch manufacturer must be used, not doing so will void the hitch warranty.
I have linked an FAQ on hitch ball mounts. view full answer...
We do have adapters to allow the Roadmaster Base Plates, # 172-5, to work with Blue Ox tow bars. If you have an Aventa, Aventa II, Kar Bar, Aladdin, Alexxa, or Acclaim RV-mounted tow bar, or an A-frame Blue Ox tow bar with 1 or 3 pronged attachments, you can use RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter, # RM-033 or # RM-032. Base plate installation can be moderately difficult, but if you have experience with automotive projects you will be able to perform the installation... view full answer...
The Derale Dyno-Cool Tube-Fin Transmission Cooler Kit, # D12906, comes with everything you will need to mount and install it on your 1997 Chevy Lumina. The system installs in line with your current transmission hoses.
I have included an FAQ article on Transmission Coolers below. There is a lot of helpful information, including the best places to mount the unit. I have also included a video showing installation of a transmission cooler. Installation will be similar on your vehicle. view full answer...
Go To Results