I checked with the manufacturer, Kat's, about the Kat's Heaters Custom Fit Engine Block Heater part # KH11812 which is a fit for a 2011 Hyundai Genesis with 3.8L V6 Engine. The correct location is on the right rear "RR" side of the engine as seen in the attached photo. Unfortunately, Kat's does not provide exact step by step instructions for installation. It's possibly removal of existing component is required for installation but that will be up to the discretion of the installer. view full answer...
I checked with Kat's regarding the installation of the Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style # KH11812 that fits a 2012 Hyundai Genesis 3.8L V6 and 4.6L V8 engine and they did not have any type of information that said the exhaust manifold would have to be removed to install this heater. They will state if those type of steps need to be taken and there are none for this vehicle. The cartridge heater needs to be installed in the "Right Rear" position, as you can... view full answer...
The Kat's Heaters Custom Fit Engine Block Heater part # KH11812 for your 2012 Hyundai Genesis 3.8L V6 will install on the right hand (Passengers) side of the engine in the rear most (Closest To Firewall) plug.
Don't forget to use the Kat's Heaters Plug Cover part # KH28405 to prevent dirt and debris from getting inside the connector while not in use. I have attached an illustration to give you a better idea where the right rear plug is located. view full answer...
The installation time on your 2011 Hyundai Genesis for the Draw-Tite Trailer Hitch, part # 36486 we have listed for this hitch is based on using an experienced installer and in a shop where conditions are more ideal for installing. For our installers the estimated installation time is between 1 and 1-1/2 hours.
For a person who may not be as experienced at installations I would estimate the installation time to be approximately double, so I would say around 2-1/2 to 3 hours. There is... view full answer...
For your 2009 Hyundai Genesis sedan you will need the Curt # C12086 trailer hitch, and then for the wiring the correct part is the Curt T-Connector Harness # C56041. view full answer...
We do have trailer hitches that fit your 2015 Hyundai Genesis. If you have a sedan you'd want the part # C12086 or if you have a coupe part # C11086. These do not require any welding to install on your vehicle either. They will easily install with the included hardware that allows it to bolt to your vehicle frame. view full answer...
Go To Results