The only trailer hitch available that is designed to fit your 2018 Genesis G80 is the Curt Class II Round Tube Receiver Hitch # C12165 that you mentioned. Trailer hitches will typically feature the same type of weight rating as the vehicle they are designed to fit. This is most likely why there isn't a higher rated, 2 inch option available for your vehicle.
This particular hitch features a 3,500 pound towing weight capacity and a 350 pound tongue weight limit. You will also want to verify... view full answer...
There is one trailer hitch receiver that is a fit for a 2020 Genesis G80, which is made by Curt:
- Curt Trailer Hitch Receiver # C12165
This is a Class II hitch with a 1-1/4 inch receiver which just means you will need to ensure you get a bike rack that is a fit in a 1-1/4 inch hitch receiver. For a heavy e-bike I recommend the Thule T2 Pro XTR 2-Bike Rack, part # TH23JV.
I have added links below to the installation instructions of the Curt hitch as well as a link to a video review of... view full answer...
For a great economical trunk rack that will not damage the trunk of your 2017 Genesis G80, I recommend the Hollywood Racks Express 3 Bike Carrier - Fixed Arms - Trunk Mount # HRE3. In order to protect your vehicle's finish, there are a total of 4 pads on the base that serve as support. In addition, the hooks that anchor to your vehicle include a rubber coating to add even more protection against damage.
If you want a suggestion for a rack that holds a different number of bikes, I would... view full answer...
Yes, the Curt Class II Trailer Hitch Receiver # C12165 will fit your 2020 Genesis G80 whether it's all wheel drive or just two wheel drive.
Attached are the instructions but if you let me know what you plan on using the hitch for I'd be more than happy to make a recommendation for you. view full answer...
The 1-1/4-inch hitch we offer for the 2017 Genesis G80 comes from Curt, their part # C12165. This includes the required mounting hardware and does require a bit of drilling for installation. The written instructions are linked for reference along with a helpful hitch installation article.
We do not have affiliate installers around the country but Curt and other hitch makers do maintain a dealer listing to help you find a nearby installer if your local trusted auto service shop cannot do... view full answer...
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" Item # C12165, which is the only hitch available for the 2017 Genesis G80, does require drilling for installation. I have included a link to the installation instructions but we haven't had that vehicle in to make a video showing installation.
If you decide to go ahead with this trailer hitch and plan on doing any towing the recommended ball mount is Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs Item... view full answer...
In regards to the Viking Solutions Kwik Hoist part # 310-VKH001, the distance from the pulley to the back of the upright or the part that rests on the tree is about 28" according to Viking Solutions. I would however not be able to provide a dimensional drawing. view full answer...
If you are already planning on needing more space than the 66" Yakima Rack and Roll Trailer # Y08106 can provide then I highly recommend going ahead and getting the 78" Rack and Roll # Y08107 instead.
The 78" trailer is a whole foot wider than the 66" option so it can better handle the wider loads. If you were to add 78" crossbars to the 66" trailer the bars would stick out past the fenders and you are much more likely to tip the trailer that way. I reached out to my contact at Yakima... view full answer...
According to Curt, their # C12165 fits all models of the 2017 Genesis G80 and G90 including the AWD model. In previous model years, the hitch didn't fit the AWD models but Curt confirms that isn't the case for the 2017 model year. view full answer...
I checked with Curt and they list the hitch part # C12165 as a fit for all models of the 2018 Genesis G80 like your all wheel drive model so it would fit and work well. view full answer...
Yes. The Curt # C12165 will also fit the AWD versions of the 2020 Genesis G80. This hitch will provide you with a 1-1/4" receiver that can be used for towing a small trailer or carrying a bike rack. If you're looking for a bike rack that will fit in the 1-1/4" receiver, I recommend using something like the Thule Camber 2 # TH9058, since it's a high quality Thule rack that also tilts away from the back of your vehicle to allow trunk access. This is a 2 bike carrier. You could also consider... view full answer...
Go To Results