Expert Answers about Ford Freestyle

• Wiring a French Built Mecano Galva Utility Trailer to a 2007 Ford Freestyle
• European trailer wiring is very different from North American, specifically U.S. trailer wiring. In Europe a 7-Way connector is used to achieve the same functions U.S. trailers use in a 4-Way system. Our brake and turn signal functions are combined. A U.S. 4-Way is set up as follows: Brown - tail lights, yellow - left turn and brake, green - right turn and brake, and white is ground. Reverse lights are not typically used on small utility trailers in the U.S. In many states they are not...
  view full answer...


• Installing 7-Way Trailer Connector on 2005 Ford Freestyle
• To wire the 7-way connector you have already purchased, you will need the Pigtail Wiring Harness for Pollak Replacement 7-Pole RV Socket, part # PK11998. This harness would plug into the rear of the trailer connector, and the bare leads on the other end would connect to the existing vehicle wiring, using the color code mentioned in the product description. If you do not already have one, I would recommend using a circuit tester, like part # PTW2993 to locate the correct circuits for installing...
  view full answer...


• Do 2005 Ford Freestyle WeatherTech Rain Guards Install with Adhesive
• I took a look at the rain guards we offer for your 2005 Ford Freestyle and the only style we have is the WeatherTech Side Window Rain Guards with Dark Tinting # WT82376 which install inside the window channel so no glue is needed. If you have the WeatherTech kit then I recommend referencing the instructions, but if you have a different kit then I recommend reaching out directly to the manufacturer so any adhesive they might say you're needing.
  view full answer...


• Recommended Adapter 4 Pole to 7 Pole and 4 Pole for a 2006 Ford Freestyle
• Thanks for entrusting etrailer in the past and we appreciate your business. What you need is an adapter 4 pole to 7 pole and 4 pole such as part # 37185. This adapter converts from 4 pole wiring on vehicle to 7 pole round plug and 4 pole flat. See diagram to the right. Since you will be installing additional wiring, 10 gauge jacketed wire # 10-2-1 would be a great option. One wire is connected to the brake controller which carries the power back for the trailer brakes while the other...
  view full answer...