Expert Answers about GMC Envoy
- Recommended Spare Tire Carrier for 8 Lug Wheel on Trailer Tongue
- If your spare tire is under 45-lbs, then you can use the Fulton Hi-Mount Spare Tire Carrier # FHDSTC0101 but a better solution if you've got a trailer frame that is 4" x 4" would be the Ultra-Fab Folding Spare Tire Carrier for Trailers and RVs - Bumper Mount # UF15-954730. This carrier has a capacity of 60-lbs so it's going to be able to handle a little bit more beefy of a wheel; while it's normally meant for a bumper, it can be used on a trailer frame all the same.
I've linked some review...
view full answer... - Parts Needed to Flat Tow a 2004 GMC Envoy
- Choosing the correct tow bar will vary a little depending on what brand base plate is installed on your 2004 GMC Envoy. If you don't already have a base plate kit then I recommend going with the Demco Classic # DM9518119 which will pair very nicely with the Demco Commander II Non-Binding Tow Bar # DM9511012.
To complete your towing setup you also need wiring and a supplemental braking system. For wiring I personally like the Combo Kit # DM9523057 because it also comes with locks and a...
view full answer... - Parts Needed to Flat Tow a 2005 GMC Envoy
- To flat tow your 2005 GMC Envoy, you are going to need a Base Plate Kit # BX1709, a Tow Bar # BX7380, a vehicle tow bar brake system # SM99251, and vehicle tow bar wiring # RM-15247. You may also need a high/low hitch adapter similar # BX88130.
For a Base plate Kit I recommend the Blue Ox Base Plate Kit # BX1709. This base plate kit is custom made to fit your vehicle. All the necessary hardware is included with this kit. This base plate is pretty easy to install if you are handy with basic...
view full answer... - Parts Needed to Flat Tow a 2006 GMC Envoy Denali Behind an RV with EazAligner 2000 Tow Bar
- For your 2006 GMC Envoy Denali you will need base plates # 3109-1. To attach your EazAligner 2000 tow bar you will need adapter # RM-038 and quick disconnects # RM-201.
If you do not already have safety cables you will need to add some, # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use a simple magnetic kit such as # RM-2120. Or, for a more permanent solution I recommend the 6 diode kit # 154-792-118158.
And finally, most states now require...
view full answer... - Complete Flat Towing Setup for a 2007 GMC Envoy Denali Using Roadmaster Tow Bars
- You can still use a Blue Ox base plate like the Blue Ox Base Plate Kit # BX1709 you're looking at. You're just going to need to also use an adapter like # RM-031 or # RM-031-5.
The adapter you need will be dependent on the Roadmaster tow bar you have. So if you have the Blackhawk, Falcon, or Sterling tow bars, you'd need # RM-031, but if you had the Nighthawk, Sterling, or Blackhawk 2 All-Terrain you'd need # RM-031-5.
To finish up a complete flat towing setup, you're going to also need...
view full answer... - Cost Effective Parts Needed to Flat Tow a 2004 GMC Envoy
- It sounds like you're looking for a cost-effective kit for flat towing your 2004 GMC Envoy. In addition to the Blue Ox Adventurer Tow Bar # BX7322 (which is rated high enough for your Envoy if you don't load it up with cargo) you'll need the following:
Blue Ox Base Plate Kit - # BX1709
Blue Ox Safety Cables - # BX88196
Magnetic Tow Lights - # TL21RK
Blue Ox Braking System - # BLU37TR
This includes all of the equipment you need to flat tow your Envoy.
view full answer... - Recommended Grille Guard For a 2007 GMC Envoy
- For a 2007 GMC Envoy all we carry are the Westin Safari Light Mounting Bar with Installation Kit # 30-0025-1345 and # 30-0020-1345 which include the mounting hardware.
However, if you're needing hardware for a different grille guard, I can confidently say there isn't going to be an option as Westin nor Aries make parts for an '07 Envoy.
view full answer... - What Installation Hardware Kit Goes With Westin Grille Guard For 2003 GMC Envoy
- To order the Westin Grille Guard with the installation kit use # 30-0025-1345. This kit comes with the grill guard and also the installation kit.
To order the installation kit by itself use # 30-1345.
I have linked both product pages for you along with installation instructions. Pricing is listed on the product pages.
view full answer...
Go To Results