bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders

Filter Questions and Answers:

reset filter

Expert Answers about Ford EcoSport


  • What Tools Are Required To Install the Draw-Tite Hitch 36660 On a 2019 Ford EcoSport
  • In order to install the Draw-Tite Trailer Hitch Receiver part # 36660 on a 2019 Ford EcoSport you will need the following tools. - Ratchet - 5.5mm, 10mm, 15mm, 17mm, and 3/4" Sockets - Utility Knife - Marker - Torque Wrench - Pry Bar - 6" Socket Extension - Tape Measure I will say that the majority of basic hand tool sets will have all of the above components needed to install the trailer hitch except for the toque wench. However, the torque wench can be rented from a local auto parts...
    view full answer...

  • Trailer Wiring Install Video for Curt Harness on 2018 Ford EcoSport
  • The easiest way I can show you how to install the Curt trailer wiring harness # C59236 on your 2018 Ford EcoSport is by having have you check out the install video I attached for this on a 2018 EcoSport just like yours.
    view full answer...

  • Wire Colors of Sensor on 119250KIT
  • I can certainly try and help you determine the correct clamps for your wires with the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT. With this kit, the clamps with the red/white wires are the Left Turn and Tail, and the clamp with the longer wire of the two will be the Left Turn. For the clamps with the black wires, which Stop and Right Turn, the clamp with the longer wire between these two will be the Right Turn.
    view full answer...

  • Installing the ZCI Circuit Protected Vehicle Wiring Harness on a 2018 Ford EcoSport
  • It's a little odd that the wiring for the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT isn't long enough for your 2018 Ford EcoSport. I think the issue that you are running into is that you are probably trying to mount the converter in the middle of your vehicle when it would be more beneficial to install the converter on either side of your EcoSport as the Yellow and Green wires for the turn functions have 95" - 97" leads so they can easily reach to the other side of your vehicle....
    view full answer...