In order to determine the correct rise or drop for a ball mount, there are some simple measurements that you can take. We actually have an FAQ on this subject which I have linked for you. Just make sure that when you take the measurements, the trailer and the towing vehicle are both on level ground. I have also included a link to our ball mount main page for you. view full answer...
I would use a Class III receiver hitch with a 2 inch opening. The Class III hitches will have more capacity and available accessories than the Class II hitches available for the 2007 Jeep Commander. We have 5 different hitches that will fit your Commander. I have linked to a page that has all of them. None of the hitches we have for your Commander require drilling. A lot of Dodge/Jeep/Chrysler SUVs have started using hitches that are designed to bolt to the integrated frame bumper like... view full answer...
Once you have the 4-way trailer wiring harness # 118408 installed you can use our # ETBC7 kit to convert it to a 7-way.
The # ETBC7 also includes everything you need to install an electric trailer brake controller like the Prodigy P3 # 90195. view full answer...
Yes, the Tow Ready Replacement 7-Way Flat Pin and 4-flat Combo Adapter Harness for Vehicles with a Factory Socket # 20135 will fit.
We also recommend the # 90195 if you are in the market for a brake controller. view full answer...
Installation of the Curt Venturer # C51110 on your 2007 Commander will require the # C51515 universal wiring harness. Unfortunately, there is no plug and play option for your Jeep. view full answer...
The two things you will want to do first before towing are to make sure the 2008 Jeep Commander has the capacity to tow 3,000 pounds and consult the Jeep Wrangler owners manual for the proper procedure for towing.
For the Wrangler, you will need several parts to flat tow it. First, you will need base plates. There are 2 options depending on what bumper you have. For base plates to fit, you will need to have the U-channel bumper. If you have a different type of bumper it probably would... view full answer...
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118408 is the correct harness for the 2007 Jeep Commander Rocky Mountain.The purpose of this item is to control and allow the basic hookup of the three lighting functions (running, turn, and brake lights) plus one pin is provided for a ground wire. The Plug-In location is behind the driver and passenger side tail lights. I have the complete install video attached.
If your trailer has electric brakes, the Universal... view full answer...
It looks like the closest bearing would be the Replacement 1.5" OD Bearing for Lippert Components Electric Stabilizer Jacks - Qty 1 # LC115883. This closely matches your measurements. This bearing has inside diameter of 0.625", outside diameter of 1.5", and thickness of .525". view full answer...
Go To Results